Its one of 2 things you either over oiled the K&N and its not getting enough air flow through the filter and will foul out the plugs in time.
Or you did not reconect the the float vent. Your bike has ram air and will run like crap the faster you move if the float bowls are not at the same pressure as the intake. These lines are the 3/4 inch lines a that run around in the carb area. You might have also unpluged the solinoid that switches from high to low speed vent. That solinoid is about the size of a fist and has 3 or 4 of the 3/4 lines ran to it. It switches at about 12mph to the high speed vent which is the one thats on the air ox inlet not the 2 at the front of the bike.
My F3 had 38,000 miles on it and my F2 had 42,000 miles on it I know these bikes like the back of my hand and can help with almost any problems you have. I miss my F3 it was a great bike.
|