![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
![]() |
#1 |
Clit Commander
Join Date: Feb 2008
Location: Las Vegas
Moto: 2012 Ducati 1199 Panigale S
Posts: 4,189
|
![]()
The Yamaha site's down and I can't get see the diagram of the wheel, so I gots questions.
Do the wheels have races that the bearings go in, like a some car's rotors? Reason I ask is because I got a spare set of wheels for the track and I'm wondering if I could just swap the bearings from the set that's on my bike to the set that will be going on my bike, ya dig?
__________________
Dress for the crash. Not the ride. ![]() |
![]() |
![]() |
![]() |
#2 |
Mobile Post-Whore Unit
Join Date: Feb 2008
Location: Houston, TX
Moto: 2000 Honda Magna 750
Posts: 455
|
![]()
Hope this helps. I didn't know what year or specific model your R6 is but you'll get the idea:
http://www.bikebandit.com/houseofmot...-2006/o/m10342 There's diagrams of the wheels with bearings.
__________________
This is my signature. Yay. |
![]() |
![]() |
![]() |
#3 |
Trip's Assistant
![]() Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
|
![]()
most of the time they are pressed into the wheels or hubs.
Here's what I got on the chop. I inspected mine when I had the wheels off. You can see the green synthetic grease still in there. ![]() Then lubed with some mobil 1 syn grease ![]() |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|