Mock Box Intake

Digifox · 06-28-2009, 03:14 PM

Before you even read this im being SERIOUS and i want Input not just smart ass comments

Okay so i know all the newer bikes have a Ram air Intake with a big arse Box...
And my Bike HAD a pressurized Box, But it sucked to i ripped it out

And i do NOT want to put pods on it, so At the moment im running OPEN carbs with nothing but the Rubber things for the airbox(They are the only thing for an EX250 that even Resembles Vorticity stacks, And they go make it run better)

And im quite happy with the performance, But i have Two Problems:

1.being No filter
2. the CVK is supposedly effected by slightest breeze

So what i was thinking is maybe make a Small Box like

Only instead of the runners just holes That my Intake booties will fit in so i still get the funneled airflow(runs like SHIT without them) and then run a hose up around the Rad. with a Filter on it, so its like a Cold air intake

Idea From This

Pay NO attention to the Supercharger on the Two stroke

Or Maybe just a box with the filter stuck out the side?

Input Please
Will this actually Work Or will it just be a waste of time and make the bike run like shit?

Cos' the way it sits i can go from 2k putting to 12k without a single problem
Tried it with out the intake boots, Stumbles and doesn't want to go....
Since the Intake boots are Tapered and have a Wide mouth

Dave · 06-28-2009, 03:26 PM

give it a shot. cant hurt

Amber Lamps · 06-28-2009, 04:39 PM

I think that you still need to at least make the box to hold some kind of foam pre-filter or something to keep debris and bugs out of your motor. Of course, you could just modify the stock air box with a couple holes in the top. Start small and make them larger/more numerous until you get the effect you're after. Heck, there may already be a mod for this on the net. Do a search and see what you get.

was92v · 06-28-2009, 04:49 PM

I understand the hassle of dealing with a stock airbox, but
Why not use individual filters or a single with 2 flanges? ie K&N?

BobTheBiker · 06-28-2009, 05:09 PM

the K&N filters REQUIRE rejetting on a CVK carb and you still dont get optimal power, so you're LOSING no matter how you look at it.

same issue if you tried a cold air intake, it'd pressurize the air comin in to a degree, which will make it run like shit.

go back to your stck airbox. yeah, its a pain in the ass to work on the bike with it, I know, but its the best for optimal power and reliability.

zed · 06-28-2009, 09:56 PM

Quote:

Originally Posted by BobTheBiker

the K&N filters REQUIRE rejetting on a CVK carb and you still dont get optimal power, so you're LOSING no matter how you look at it.

same issue if you tried a cold air intake, it'd pressurize the air comin in to a degree, which will make it run like shit.

go back to your stck airbox. yeah, its a pain in the ass to work on the bike with it, I know, but its the best for optimal power and reliability.

this is the answer here.

if you are trying to do some kind of ram air you push more air through the carb but you have to also pressurize the float bowl too.

pods and CV's don't really mix well either, lots of work won't even help.

06-28-2009, 03:14 PM	#1
Digifox Cl4p-Trap Join Date: Nov 2008 Location: Columbus, Ohio Moto: Your mom. Posts: 734	Mock Box Intake Before you even read this im being SERIOUS and i want Input not just smart ass comments Okay so i know all the newer bikes have a Ram air Intake with a big arse Box... And my Bike HAD a pressurized Box, But it sucked to i ripped it out And i do NOT want to put pods on it, so At the moment im running OPEN carbs with nothing but the Rubber things for the airbox(They are the only thing for an EX250 that even Resembles Vorticity stacks, And they go make it run better) And im quite happy with the performance, But i have Two Problems: 1.being No filter 2. the CVK is supposedly effected by slightest breeze So what i was thinking is maybe make a Small Box like Only instead of the runners just holes That my Intake booties will fit in so i still get the funneled airflow(runs like SHIT without them) and then run a hose up around the Rad. with a Filter on it, so its like a Cold air intake Idea From This Pay NO attention to the Supercharger on the Two stroke Or Maybe just a box with the filter stuck out the side? Input Please Will this actually Work Or will it just be a waste of time and make the bike run like shit? Cos' the way it sits i can go from 2k putting to 12k without a single problem Tried it with out the intake boots, Stumbles and doesn't want to go.... Since the Intake boots are Tapered and have a Wide mouth __________________ Firm as cherries.

06-28-2009, 03:26 PM	#2
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	give it a shot. cant hurt __________________ TWF Post whore #6

06-28-2009, 04:39 PM	#3
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	I think that you still need to at least make the box to hold some kind of foam pre-filter or something to keep debris and bugs out of your motor. Of course, you could just modify the stock air box with a couple holes in the top. Start small and make them larger/more numerous until you get the effect you're after. Heck, there may already be a mod for this on the net. Do a search and see what you get.

06-28-2009, 04:49 PM	#4
was92v Nowhere Man Join Date: Nov 2008 Posts: 558	I understand the hassle of dealing with a stock airbox, but Why not use individual filters or a single with 2 flanges? ie K&N?

06-28-2009, 05:09 PM	#5
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	the K&N filters REQUIRE rejetting on a CVK carb and you still dont get optimal power, so you're LOSING no matter how you look at it. same issue if you tried a cold air intake, it'd pressurize the air comin in to a degree, which will make it run like shit. go back to your stck airbox. yeah, its a pain in the ass to work on the bike with it, I know, but its the best for optimal power and reliability.