scorpions vs sharks

MikeSP1 · 05-19-2011, 11:57 AM

looking for another lid, anybody have experience with the sizing of the exo-1000 and rsr2? I mean, should a medium in one equate to a medium in the other.

Or do scorpions run sizing more like the HJCs?

Homeslice · 05-19-2011, 01:55 PM

My experience is that Sharks are tighter in the forehead/nose than Scorpions.

pauldun170 · 05-19-2011, 03:19 PM

I have the exo-1000.

Try them on...only way to be sure

Mudpuppy · 05-19-2011, 11:09 PM

i was recently looking for a new helmet and a friend of mine, who is pretty fucking knowledgeable on all things bikes, explained to me the difference between plastic/polycarbonate helmets and fiberglass/kevlar/aramid helmets.. he has tested both plastic and the fiberglass and he swears by the fiberglass (which you will also note are more money but I guess depends on how much you think your head is worth? Do you have a $150 head or a $500 head?).

http://en.wikipedia.org/wiki/Motorcycle_helmet

Tmall · 05-20-2011, 08:14 AM

Quote:

Originally Posted by Mudpuppy

i was recently looking for a new helmet and a friend of mine, who is pretty fucking knowledgeable on all things bikes, explained to me the difference between plastic/polycarbonate helmets and fiberglass/kevlar/aramid helmets.. he has tested both plastic and the fiberglass and he swears by the fiberglass (which you will also note are more money but I guess depends on how much you think your head is worth? Do you have a $150 head or a $500 head?).

http://en.wikipedia.org/wiki/Motorcycle_helmet

If you want to talk "tests" an $89 hjc is as good as any helmet on the market.

Tmall · 05-20-2011, 08:13 AM

My experience is, my buddy's Scorpion fell apart. (was the one with the built in internal visor) the "S" emblem fell off, the cheek pad attachements came off. It was comfortable for the first little bit, then when the cheekpads started moving he bought a Shoei.

My Shark was an RSi. I loved it. It was comfortable, extremely light and held up well over three years. The only downside of a super light helmet such as a Shark is that it is going to be loud.

Mudpuppy · 05-20-2011, 11:09 AM

ok i'd like to talk tests then - please provide some data..

his data is from 160mph+ crashes on race tracks and whether or not he got a major concussion..

Tmall · 05-20-2011, 11:25 AM

Quote:

Originally Posted by Mudpuppy

ok i'd like to talk tests then - please provide some data..

his data is from 160mph+ crashes on race tracks and whether or not he got a major concussion..

http://sharp.direct.gov.uk/
http://www.motorcyclistonline.com/ge...iew/index.html

The first link has $50 helmets meeting the highest standard. The more expensive helmets are usually more expensive because of, sponsorships, aerodynamics, graphics, bells and whistles, comfort, quietness, and people who believe "$100 dollar head, $100 helmet".

There's nothing wrong with spending good money on whatever you like. Everybody does it. But, paying more doesn't always mean you're getting the safest product.

MikeSP1 · 05-20-2011, 12:37 PM

I already own a shark RSR2, fucking love the damn thing. But I'm not one for only having one lid. Shark discontinued the RSR2 line, and I haven't found the Race-R or Race-R Pro models online yet. Don't have a problem spending $$$ on lids, simply curious about sizing, not theology.

Mudpuppy · 05-20-2011, 04:23 PM

Quote:

Originally Posted by Tmall

http://sharp.direct.gov.uk/
http://www.motorcyclistonline.com/ge...iew/index.html

The first link has $50 helmets meeting the highest standard. The more expensive helmets are usually more expensive because of, sponsorships, aerodynamics, graphics, bells and whistles, comfort, quietness, and people who believe "$100 dollar head, $100 helmet".

There's nothing wrong with spending good money on whatever you like. Everybody does it. But, paying more doesn't always mean you're getting the safest product.

I totally agree I don't want to pay for graphics or any of that other bs, always said that. And I have, until now, used the plastic helmets. That is some interesting information though. Until someone explained the material of the helmet to me - plastic vs. fiberglass, there had never been any reason I didn't buy the inexpensive over the way more expensive helmet. But I will definitely keep that in mind, literally, when I buy my next helmet. Another fine debate - how often to replace, I say every 2 years other people think a helmet is a one time investment.

Quote:

Originally Posted by HurricaneHeather

I am pretty sure the shark would win in a fight between the two. I mean...sharks are like way bigger than scorpions.

exactly.. shark for the win.. and the scorpion sleeps in my hand..

05-19-2011, 11:57 AM	#1
MikeSP1 Perpetual trouble Join Date: Jun 2008 Location: at the base of the Alps Moto: VTX 1300C, RC51, CBR600RR, CBR929RR Posts: 715	scorpions vs sharks looking for another lid, anybody have experience with the sizing of the exo-1000 and rsr2? I mean, should a medium in one equate to a medium in the other. Or do scorpions run sizing more like the HJCs? __________________ "Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"

05-19-2011, 11:09 PM	#4
Mudpuppy South of Heaven Join Date: Mar 2008 Location: Michigan Moto: 2006 Yamaha R1 50th Anniversary Edition Posts: 1,491	i was recently looking for a new helmet and a friend of mine, who is pretty fucking knowledgeable on all things bikes, explained to me the difference between plastic/polycarbonate helmets and fiberglass/kevlar/aramid helmets.. he has tested both plastic and the fiberglass and he swears by the fiberglass (which you will also note are more money but I guess depends on how much you think your head is worth? Do you have a $150 head or a $500 head?). http://en.wikipedia.org/wiki/Motorcycle_helmet __________________ Mudpuppy Redline Superbike http://www.redlinesuperbike.com/ Learn about photography: ATP Members

05-20-2011, 11:09 AM	#7
Mudpuppy South of Heaven Join Date: Mar 2008 Location: Michigan Moto: 2006 Yamaha R1 50th Anniversary Edition Posts: 1,491	ok i'd like to talk tests then - please provide some data.. his data is from 160mph+ crashes on race tracks and whether or not he got a major concussion.. __________________ Mudpuppy Redline Superbike http://www.redlinesuperbike.com/ Learn about photography: ATP Members

05-20-2011, 12:37 PM	#9
MikeSP1 Perpetual trouble Join Date: Jun 2008 Location: at the base of the Alps Moto: VTX 1300C, RC51, CBR600RR, CBR929RR Posts: 715	I already own a shark RSR2, fucking love the damn thing. But I'm not one for only having one lid. Shark discontinued the RSR2 line, and I haven't found the Race-R or Race-R Pro models online yet. Don't have a problem spending $$$ on lids, simply curious about sizing, not theology. __________________ "Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece, but to skid across the line broadside, thoroughly used up, worn out, leaking oil, shouting GERONIMO!"

05-19-2011, 01:55 PM	#2
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	My experience is that Sharks are tighter in the forehead/nose than Scorpions.

05-20-2011, 08:13 AM	#6
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	My experience is, my buddy's Scorpion fell apart. (was the one with the built in internal visor) the "S" emblem fell off, the cheek pad attachements came off. It was comfortable for the first little bit, then when the cheekpads started moving he bought a Shoei. My Shark was an RSi. I loved it. It was comfortable, extremely light and held up well over three years. The only downside of a super light helmet such as a Shark is that it is going to be loud.