Welding

Mr Lefty · 01-17-2010, 04:04 PM

anyone do any welding on their bikes? like making racks for luggage?

I'm thinking of making my own racks for some panniers, and maybe a new tail rack that doesn't require me to remove my seat to remove it.

I wanna save money, but also be nice to design it the way I want/need.

so anyone do any welding?

derf · 01-17-2010, 05:10 PM

Yeh what do you need/want?

I built a car and a bike, a few go carts and a bunch of other stuff.

Are you looking for a design? Of the actual work?

I built a plate holder for my bike and incorporated a quick removal bar for my tail bag so that I have a solid/non-plastic section to strap the bag onto. I'll take a photo in a few so you can get an idea of what I did.

Mr Lefty · 01-17-2010, 05:19 PM

just looking for someone to ask questions...

I wanna do the work myself, cause it'd be nice to not have to bug someone else to do any changes/fixes I need.

but yes I'd like to see your tail rack...

derf · 01-17-2010, 05:35 PM

Thats the plate holder. All it is is a vertical pipe bolted to the subframe using existing bolt holes. That was welded to a horizontal pipe and the steel strip (plate mount). I have a small 2 foot aluminum bar that goes through the horizontal tube and is held in place with a pin and a cotterpin holding the pin in. I designed it so that all i have to do is pull the cotter pin out, th eretaining pin pulls out and the aluminum bar pulls out.

It's for this bag, there are 2 straps in the back that really don't have anywhere to strap on to, so the bag has a habit of inching forward.

Eventually I want to build a set of hard bags and a quick release rack to drop them off.

Mr Lefty · 01-17-2010, 05:42 PM

yeah I want to create racks for a set of pelican 1430 top loading cases... but the racks I see set them too far back IMO... I want them forward of the rear axle, so that the handling of the bike isn't altered as much.

how hard is it to learn to weld?

Cutty72 · 01-17-2010, 05:45 PM

Quote:

Originally Posted by eBBs15

yeah I want to create racks for a set of pelican 1430 top loading cases... but the racks I see set them too far back IMO... I want them forward of the rear axle, so that the handling of the bike isn't altered as much.

how hard is it to learn to weld?

Any idiot can weld, just a matter of having the materials and tools. To weld WELL takes a LOT of practice. I've been welding on and off since I was 8. My welds are strong and will hold, but quite often (especially with a stick welder) they look like bird shit.

Amber Lamps · 01-17-2010, 05:54 PM

Quote:

Originally Posted by Cutty72

Any idiot can weld, just a matter of having the materials and tools. To weld WELL takes a LOT of practice. I've been welding on and off since I was 8. My welds are strong and will hold, but quite often (especially with a stick welder) they look like bird shit.

Mig ftw! Yea, when I use a stick welder, it's NOT pretty and will require extensive grinding! Also, you need to decide what materials you want to work with. Iron/steel is a lot easier to work with IMHO but because you are just starting out, perhaps you would be better served starting with aluminum.

Mr Lefty · 01-17-2010, 05:58 PM

Quote:

Originally Posted by TIGGER

Mig ftw! Yea, when I use a stick welder, it's NOT pretty and will require extensive grinding! Also, you need to decide what materials you want to work with. Iron/steel is a lot easier to work with IMHO but because you are just starting out, perhaps you would be better served starting with aluminum.

I've heard welding aluminum is hard... and don't want to use alum, for the racks anyhow

Amber Lamps · 01-17-2010, 06:02 PM

Quote:

Originally Posted by eBBs15

I've heard welding aluminum is hard... and don't want to use alum, for the racks anyhow

Okay, just a suggestion... my biggest problem with welding aluminum is the habits and techniques that I've learned welding steel...

Amber Lamps · 01-17-2010, 05:51 PM

Quote:

Originally Posted by eBBs15

yeah I want to create racks for a set of pelican 1430 top loading cases... but the racks I see set them too far back IMO... I want them forward of the rear axle, so that the handling of the bike isn't altered as much.

how hard is it to learn to weld?

Not hard at all. Welding is one of those things that are incredibly easy on paper but is difficult in practice. The best advice that I can give you is to either buy a small, cheap welder and practice, take a class or borrow a welder...

I could explain the theory of welding but you really need to get the stinger in your hands and go for it! There are innumerable videos and books on the subject. You may even be able to get someone from the motor pool to help you out.

01-17-2010, 04:04 PM	#1
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	Welding anyone do any welding on their bikes? like making racks for luggage? I'm thinking of making my own racks for some panniers, and maybe a new tail rack that doesn't require me to remove my seat to remove it. I wanna save money, but also be nice to design it the way I want/need. so anyone do any welding?

01-17-2010, 05:10 PM	#2
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	Yeh what do you need/want? I built a car and a bike, a few go carts and a bunch of other stuff. Are you looking for a design? Of the actual work? I built a plate holder for my bike and incorporated a quick removal bar for my tail bag so that I have a solid/non-plastic section to strap the bag onto. I'll take a photo in a few so you can get an idea of what I did. __________________ Last edited by derf; 01-17-2010 at 05:13 PM..

01-17-2010, 05:35 PM	#4
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	Thats the plate holder. All it is is a vertical pipe bolted to the subframe using existing bolt holes. That was welded to a horizontal pipe and the steel strip (plate mount). I have a small 2 foot aluminum bar that goes through the horizontal tube and is held in place with a pin and a cotterpin holding the pin in. I designed it so that all i have to do is pull the cotter pin out, th eretaining pin pulls out and the aluminum bar pulls out. It's for this bag, there are 2 straps in the back that really don't have anywhere to strap on to, so the bag has a habit of inching forward. Eventually I want to build a set of hard bags and a quick release rack to drop them off. __________________

01-17-2010, 05:19 PM	#3
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	just looking for someone to ask questions... I wanna do the work myself, cause it'd be nice to not have to bug someone else to do any changes/fixes I need. but yes I'd like to see your tail rack...

01-17-2010, 05:42 PM	#5
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	yeah I want to create racks for a set of pelican 1430 top loading cases... but the racks I see set them too far back IMO... I want them forward of the rear axle, so that the handling of the bike isn't altered as much. how hard is it to learn to weld?