01-21-2010, 09:48 AM | #1 |
uncomfortably numb
Join Date: Nov 2008
Location: JOH-JAH!
Moto: WR250R & Bonneville
Posts: 409
|
Why does my bike...
...
Last edited by Triple; 02-19-2010 at 12:04 PM.. |
01-21-2010, 09:52 AM | #2 |
The cows want you dead.
Join Date: Nov 2008
Posts: 2,087
|
Have you tried turning it off, then turning it back on?
|
01-21-2010, 09:59 AM | #3 |
Semi-reformed Squid
Join Date: Nov 2008
Posts: 531
|
First things I'd check:
- cupped/squared-off tires (particularly the front); can look fine at first glance, but cupping/feathering in particular can cause some very jacked-up handling - steering head bearings; lift front w/ stem stand, feel for notchy or loose action when pivoting & pull wheel front-to-back, feeling for looseness - wheel bearings; spinning freely? - rear wheel alignment; adjusted chain or replaced tire recently? I think it would have to be off pretty badly to feel as you described, but it's worth a check |
01-21-2010, 10:28 AM | #4 |
sergeant hatred
Join Date: Jul 2009
Location: Ottawa
Moto: The bus
Posts: 2,723
|
http://www.motorcyclistonline.com/ho...els/index.html
Also check out some of these troubleshooting ideas. http://www.sportrider.com/tech/146_0...ble/index.html It might be time for refreshing the suspension. Get some springs set for your weight, and redo your front forks.
__________________
My wife was afraid of the dark...then she saw me naked and now she's afraid of the light. |
01-21-2010, 10:36 AM | #5 |
too much time on my hands
Join Date: Jul 2008
Location: the northern district of god damn
Moto: 01 ZX6R, looking for more now.
Posts: 1,802
|
has your bike been crashed recently? if so, check all your suspension components, particularly the forks for bends/damage, along with the wheels themselves for bending.
how old are your tires? has it been lowered any? if it has, you may have to adjust the front forks a little to square them up in the triples. |
01-21-2010, 10:59 AM | #6 |
Soul Man
Join Date: Nov 2008
Location: Everywhere, all the time.
Moto: '0000 Custom Turbo Cross (with jet kit).
Posts: 6,481
|
Sounds like steering head bearings, assuming your tires are ok.
You might also be low on blinker fluid. JC
__________________
The way things are going, they're gonna crucify me. |
01-21-2010, 11:22 AM | #7 |
Serious Business
Join Date: Nov 2008
Location: New York
Moto: 1993 ZX-11 2008 CBR1000rr
Posts: 9,723
|
Turn the bars back and forth and see if you feel a "notch" in the middle.
Sounds like bearings. |
01-21-2010, 11:25 AM | #8 |
Aspiring Rapper
Join Date: Nov 2008
Location: Halifax, NS
Moto: '12 CB1000R
Posts: 3,569
|
Your steering bearing can mess with how your ride feels. And since it is gradual, you don't really notice it.
Mine were clunking, I had em changed and the bike felt like I'd spent 2000 dollars freshening up the suspension, and I barely noticed since it was gradual. I just thought I wasn't feeling comfortable on the bike. |
01-21-2010, 11:27 AM | #9 | |
DefenderOfTheBuelliverse
Join Date: Feb 2008
Location: Parts Unknown
Moto: Buell XB12R
Posts: 18,585
|
When my steering head bearings got loose it felt like a warped rotor when I'd hit the brakes hard.
__________________
Quote:
|
|
01-21-2010, 12:00 PM | #10 |
Vrooom
Join Date: Nov 2008
Moto: 06 ZX6R
Posts: 4,427
|
I had something similar happen on my first bike. It was the steering head bearings.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|