It's contagious!! Winter time mods {pic overload} - Page 4

wildchild · 02-03-2010, 02:25 PM

very nice looking mods. i was looking at the derby and timing covers two weeks ago for my bike as well. love the way they look with a black bike.

derby cover question. any fluid come out when you pulled it off?

CrazyKell · 02-03-2010, 03:00 PM

thread title is no lie.

Gas Man · 02-04-2010, 05:05 AM

Quote:

Originally Posted by wildchild

very nice looking mods. i was looking at the derby and timing covers two weeks ago for my bike as well. love the way they look with a black bike.

derby cover question. any fluid come out when you pulled it off?

Well if you look closely... its standing straight up. So no... no fluid came out. If you don't have a way to stand it up right, have somebody hold it. Otherwise you will loose some fluid.

Also, pay attention to your model bike when ordering. For example. My ultra stock derby cover has an o-ring in it. The willie g skull does not, so there is now a gasket cover that goes in there. Should say right in your bike's listing for the derby cover you want.

Quote:

Originally Posted by CrazyKell

thread title is no lie.

On both contagoius and many pics!

wildchild · 02-04-2010, 09:41 AM

yeah the listing for mine needed the "mounting kit" as they called it. glad you explained it that way. may just have to do it.

Gas Man · 03-01-2010, 11:15 PM

Still busy at it... bikes spent a few weeks at the dealer for my recall and one warrenty thing, hers in for a service... now back...

On her bike... did one last stick on mod... kinda nice how they re-use the stock cap...

Still need to work on her fairing lower wind blockers...

For the Ultra...

Put in a Kury universal MP3/phone holder

Got it off ebay for $45 shipped with a $6 case.

Still need to look into hard wiring in my wiring to the stereo and whatnot.

Swapped out the Ultra seat for a SG seat for a lower feel for my feet and a better look.

Ultra's ultra comfortable

Camparo

SG Seat

Working more on the HIDs

Got my replacement spot lenses by Adjure... this allows me to run an H3 bulb instead of the too long 880 bulbs required by the HD lenses.

Left Stock

Right Adjure (with stock H3 bulb)

Gas Man · 03-01-2010, 11:15 PM

Up close (left adjure/Right hd)

The HID H3 bulb is the slightly longer bulb

Installed

You can NOT cut, lengthen, or alter the wires from the ballast to the bulb... this means I need a big hole in the back of the buckets...

With this mod there won't any need for the stock wiring in the bucket.

Cut off those connectors in the bucket

Found the wire going to each bucket as i will need it for HID wiring

Install HID lamp

Removed this side panel that we made before

Installed a few ballasts on it. Due to spot lights and not being able to lengthen ballast wires. Moved the headlight ballast to this side so I could put the other spot ballast on top of the radio where I had the headlight ballast before.

55W headlight ballast

35W spot lamp ballast

Re-installed

Gas Man · 03-01-2010, 11:15 PM

I ordered a set of Time Delay Relays from Wolsentech so that none of the HID's fire up till X amount of time I set. I set for about 30 seconds. This helps the bike battery. 1 for the headlight (Hi & Low) and 1 for the spots. This really makes the wiring harder

Made some lids out of sheet metal and a gasket from a piece of double sided foam sticky

Zip tied down

Need to tidity up some wiring and put it back together. Ran out of time. but everything is working. the time delayed HIDs are great!! And OMG they are bright!

Stay tuned...

Amber Lamps · 03-01-2010, 11:25 PM

Quote:

Originally Posted by Gas Man

Need to tidity up some wiring and put it back together. Ran out of time. but everything is working. the time delayed HIDs are great!! And OMG they are bright!

Stay tuned...

Well, if you laid off the pics a bit...

J/K nice job as always!

derf · 03-01-2010, 11:52 PM

Quote:

Originally Posted by Gas Man

Need to tidity up some wiring and put it back together. Ran out of time. but everything is working. the time delayed HIDs are great!! And OMG they are bright!

Stay tuned...

Where is the normal harley oil stain, it looked like it might be missing, you better get on that

Gas Man · 03-02-2010, 12:06 AM

Derf. You better watch it.

03-01-2010, 11:15 PM	#35
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Still busy at it... bikes spent a few weeks at the dealer for my recall and one warrenty thing, hers in for a service... now back... On her bike... did one last stick on mod... kinda nice how they re-use the stock cap... Still need to work on her fairing lower wind blockers... For the Ultra... Put in a Kury universal MP3/phone holder Got it off ebay for $45 shipped with a $6 case. Still need to look into hard wiring in my wiring to the stereo and whatnot. Swapped out the Ultra seat for a SG seat for a lower feel for my feet and a better look. Ultra's ultra comfortable Camparo SG Seat Working more on the HIDs Got my replacement spot lenses by Adjure... this allows me to run an H3 bulb instead of the too long 880 bulbs required by the HD lenses. Left Stock Right Adjure (with stock H3 bulb) __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

03-01-2010, 11:15 PM	#36
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Up close (left adjure/Right hd) The HID H3 bulb is the slightly longer bulb Installed You can NOT cut, lengthen, or alter the wires from the ballast to the bulb... this means I need a big hole in the back of the buckets... With this mod there won't any need for the stock wiring in the bucket. Cut off those connectors in the bucket Found the wire going to each bucket as i will need it for HID wiring Install HID lamp Removed this side panel that we made before Installed a few ballasts on it. Due to spot lights and not being able to lengthen ballast wires. Moved the headlight ballast to this side so I could put the other spot ballast on top of the radio where I had the headlight ballast before. 55W headlight ballast 35W spot lamp ballast Re-installed __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

03-01-2010, 11:15 PM	#37
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	I ordered a set of Time Delay Relays from Wolsentech so that none of the HID's fire up till X amount of time I set. I set for about 30 seconds. This helps the bike battery. 1 for the headlight (Hi & Low) and 1 for the spots. This really makes the wiring harder Made some lids out of sheet metal and a gasket from a piece of double sided foam sticky Zip tied down Need to tidity up some wiring and put it back together. Ran out of time. but everything is working. the time delayed HIDs are great!! And OMG they are bright! Stay tuned... __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-03-2010, 02:25 PM	#31
wildchild cruiser Join Date: Nov 2008 Location: on the run Moto: '09 HD superglide, 16 Yamaha FZ 09 Posts: 2,749	very nice looking mods. i was looking at the derby and timing covers two weeks ago for my bike as well. love the way they look with a black bike. derby cover question. any fluid come out when you pulled it off?

02-03-2010, 03:00 PM	#32
CrazyKell Vrooom Join Date: Nov 2008 Moto: 06 ZX6R Posts: 4,427	thread title is no lie.

02-04-2010, 09:41 AM	#34
wildchild cruiser Join Date: Nov 2008 Location: on the run Moto: '09 HD superglide, 16 Yamaha FZ 09 Posts: 2,749	yeah the listing for mine needed the "mounting kit" as they called it. glad you explained it that way. may just have to do it.

03-02-2010, 12:06 AM	#40
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	Derf. You better watch it.