Quite proud of myslef

Digifox · 06-05-2009, 12:25 PM

After weeks of sitting in the shed half torn apart i pull my Ninja out yesterday and started working.

Tightened the Head bolts up quite a bit, Flipped the cams 180 Degrees, and put it back together.
The cams where over lapped and Flipped(spark at the wrong time and no compression)

First try it fired up!
*With out the muffler it was Effing loud*

A bit of Black smoke from all the Crap in it and its running GREAT now!
No trouble starting Or oil leaks either!!!!!

Actually quite proud of this now...
Filled it up with Anti-freeze and topped off the oil and bolted the pipe back on

Might go for a ride later today or tomorrow

06-05-2009, 12:25 PM	#1
Digifox Cl4p-Trap Join Date: Nov 2008 Location: Columbus, Ohio Moto: Your mom. Posts: 734	Quite proud of myslef After weeks of sitting in the shed half torn apart i pull my Ninja out yesterday and started working. Tightened the Head bolts up quite a bit, Flipped the cams 180 Degrees, and put it back together. The cams where over lapped and Flipped(spark at the wrong time and no compression) First try it fired up! With out the muffler it was Effing loud A bit of Black smoke from all the Crap in it and its running GREAT now! No trouble starting Or oil leaks either!!!!! Actually quite proud of this now... Filled it up with Anti-freeze and topped off the oil and bolted the pipe back on Might go for a ride later today or tomorrow __________________ Firm as cherries.