Rearset Alternative

nhgunnut · 01-17-2010, 12:20 PM

I just finished this mod on my B King but they list the Parts for Busa and lots of other bikes as well.
So I was looking for a way to increase leg room on the B King. I have used Buell pegs on my Busa but wanted something a bit different.
I found the MFW Vario Peg system. Since none of our sponsors had them I went here
http://www.twistedthrottle.com/trade...view/4703/613/
Now that price you see one the Web page is a little deceiving because it is actually a 3 part system and each part is priced seperately so actual cost is $139 + shipping. and here is what you get.
You have choices of 20mm 23 mm and 30mm extensions. I chose 23mm

Please note two of each come in a package.
Loosely assembled they look like this

They are a pretty easy install. Remove the retaining clip on the Pin Holding the existing Peg Pin in place. Slide out the Pin take the Spring from the stock peg and move it into the replacement mount. Slide the pin in (took a little juggling to get the spring in correctly) and you are left with this

Now one of the nice part of this system is that the "Drop arm" and the mount nave cog style notches that allow you to set the angle

and I chose a lightly rearward cant. Once you have set the angle tighten the hex screw (Blue lock tight) then pry the black beauty cap off the end of the peg slide onto the end of the "Drop Arm" tighten that, replace the beauty cap and you are done

Everything feels good in the garage shifts easy Foot contacts the rear brakes easily. But since I am hear in NH with snow covering my rather long drive way I can't give you a ride report yet.
They are of good quality and seem a good option if you don't want to drop $400 for rearsets.

01-17-2010, 12:20 PM	#1
nhgunnut gun totin redneck Join Date: Apr 2008 Location: South West New Hampshire Moto: turbo busa 999 Duc Goldwing & Victory Posts: 1,130	Rearset Alternative I just finished this mod on my B King but they list the Parts for Busa and lots of other bikes as well. So I was looking for a way to increase leg room on the B King. I have used Buell pegs on my Busa but wanted something a bit different. I found the MFW Vario Peg system. Since none of our sponsors had them I went here http://www.twistedthrottle.com/trade...view/4703/613/ Now that price you see one the Web page is a little deceiving because it is actually a 3 part system and each part is priced seperately so actual cost is $139 + shipping. and here is what you get. You have choices of 20mm 23 mm and 30mm extensions. I chose 23mm Please note two of each come in a package. Loosely assembled they look like this They are a pretty easy install. Remove the retaining clip on the Pin Holding the existing Peg Pin in place. Slide out the Pin take the Spring from the stock peg and move it into the replacement mount. Slide the pin in (took a little juggling to get the spring in correctly) and you are left with this Now one of the nice part of this system is that the "Drop arm" and the mount nave cog style notches that allow you to set the angle and I chose a lightly rearward cant. Once you have set the angle tighten the hex screw (Blue lock tight) then pry the black beauty cap off the end of the peg slide onto the end of the "Drop Arm" tighten that, replace the beauty cap and you are done Everything feels good in the garage shifts easy Foot contacts the rear brakes easily. But since I am hear in NH with snow covering my rather long drive way I can't give you a ride report yet. They are of good quality and seem a good option if you don't want to drop $400 for rearsets. __________________ Evolution requires a body count, Count or be Counted! Last edited by nhgunnut; 01-17-2010 at 12:40 PM..