Anyone rode a 2009/2010 ZX6R? - Page 4

101lifts2 · 01-11-2010, 06:54 PM

Quote:

Originally Posted by Dave

he is aware that that fork is bpf right? I mean i dont know if it adjusts different but hell it might.

Yes of course...bpf is just more expensive to rebuild. lol

101lifts2 · 01-11-2010, 07:02 PM

Quote:

Originally Posted by Homeslice

Did you get it measured and set up for you? I find it hard to believe that someone like you who's 190-200 lbs would only need 1 turn on the preload. If your preload is too soft then it will cause the suspension to "top out" over bumps and when you drive out of turns.

Which is because either it's topping out, or there's too much high-speed damping.

This is not a conventional fork, remember. And yes he measured it and it barely moves.

Homeslice · 01-11-2010, 07:19 PM

All I'm saying is if you got proper sag with only 1 turn of preload from full soft, then they must be using one hell of a stiff spring rate. So that means anyone lighter than you would probably be forced to swap to lighter springs.

101lifts2 · 01-11-2010, 08:37 PM

Quote:

Originally Posted by Homeslice

All I'm saying is if you got proper sag with only 1 turn of preload from full soft, then they must be using one hell of a stiff spring rate. So that means anyone lighter than you would probably be forced to swap to lighter springs.

The sag is not measured the same way as a cartridge type fork.

Porkchop · 03-10-2010, 12:19 AM

Did I miss pictures somewhere???

Dave · 03-10-2010, 10:42 AM

none were posted.

ontwo · 03-10-2010, 12:44 PM

Our dealership just dropped the 09 to $6999

Homeslice · 03-10-2010, 01:30 PM

because the 2010 is improved, right?

marko138 · 03-10-2010, 02:30 PM

Quote:

Originally Posted by Homeslice

because the 2010 is improved, right?

Because the economy SUCKS.

ontwo · 03-10-2010, 02:38 PM

Quote:

Originally Posted by marko138

Because the economy SUCKS.

Bingo...we have a winner.

Kawaski slashed prices on all 09s. The 6r was 10,049 one day and 6,999 the next. No changes for the 2010 model.

03-10-2010, 12:19 AM	#35
Porkchop 125GP Champion Join Date: Aug 2008 Location: Worthington, OH Moto: Empty Garage Posts: 3,418	Did I miss pictures somewhere??? __________________ *Coming soon? 2010 Ducati Monster 696 - Sold 1984 Honda VF500F - Sold 1999 Yamaha R6 - Sold

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-11-2010, 07:19 PM	#33
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	All I'm saying is if you got proper sag with only 1 turn of preload from full soft, then they must be using one hell of a stiff spring rate. So that means anyone lighter than you would probably be forced to swap to lighter springs.

03-10-2010, 10:42 AM	#36
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	none were posted.

03-10-2010, 12:44 PM	#37
ontwo Designated Drinker Join Date: Jul 2008 Location: shitville Moto: 2009 ZX6R Posts: 1,661	Our dealership just dropped the 09 to $6999

03-10-2010, 01:30 PM	#38
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	because the 2010 is improved, right?