Adding Electrical Accesorries - Page 2

JoshuaTree · 03-11-2009, 06:46 AM

Quote:

Originally Posted by Phenix_Rider

Why in hell would you want to? Running a TV and satellite receiver off your beemer for the in flight movie?

That and the inverter for the small microwave to make fresh popcorn...

Archren · 03-11-2009, 11:29 AM

Quote:

Originally Posted by JoshuaTree

That and the inverter for the small microwave to make fresh popcorn...

And here I thought it was for the espresso machine..

G-Rex · 03-11-2009, 11:36 AM

Ah I'm coming to the party a bit late. Looks like Josh has you squared away though on what you should be doing.

I used a Blue Sea marine grade fusebox on the Busa. Powered that with a relay from Radio Shack that I tied into the turn signal circuit.

Right now I'm just running the GPS off of it. I need to wire up a charger for my iPhone, and ultimately the *sear your retina* driving lights I still need to hook up, and a full complement of heated gear. The Busa charging system will run all of that. Barely.

I still need to wire up a voltage gauge so I can keep a real-time check on charging status.

JoshuaTree · 03-11-2009, 09:54 PM

Quote:

Originally Posted by Archren

And here I thought it was for the espresso machine..

I drink tea, dear.

I can't stand coffee.

Besides, I'd also have to power the coffee bean grinder, and then there would be some dilettante that would whine about not having fresh milk (i.e. necessitating a refrigerator) to make cappuccinos or lattes or whatever foofy coffee/milk beverage is in fashion nowadays...

If I do upgrade to the 60A alternator, I can run a 500 Watt microwave while riding, although I'd have to shut down the ECM pod...

:bigrofl:

Archren · 03-11-2009, 10:05 PM

Quote:

Originally Posted by JoshuaTree

I drink tea, dear.

I can't stand coffee.

Besides, I'd also have to power the coffee bean grinder, and then there would be some dilettante that would whine about not having fresh milk (i.e. necessitating a refrigerator) to make cappuccinos or lattes or whatever foofy coffee/milk beverage is in fashion nowadays...

If I do upgrade to the 60A alternator, I can run a 500 Watt microwave while riding, although I'd have to shut down the ECM pod...

Ok, so if no coffee, then you at least need a water heater.

derf · 03-12-2009, 07:07 PM

Hey I'm gonna leave the microwave and fridge at home. Ive learned over the years that I can keep food cold in the cooler with some ice, and if I need to cook the steaks I can do it on the exaust.

I am slowly compiling parts to finish the upgrades. I will do a full write up when I am done.

In the mean time I'm gonna start a parts list here so I don't forget.

Fuse block
in line glass fuse
relay
electrical connectors
wire loom

and this is slightly worse but similar to what I want it to look like. I'm using the same components.

Amorok · 03-13-2009, 03:16 PM

I wonder if I can upgrade my stator without building something. It would be nice.

03-11-2009, 11:36 AM	#13
G-Rex Where to next? Join Date: Nov 2008 Location: OK to the C Moto: TL1000R, Hayabusa, R1150RT Posts: 1,333	Ah I'm coming to the party a bit late. Looks like Josh has you squared away though on what you should be doing. I used a Blue Sea marine grade fusebox on the Busa. Powered that with a relay from Radio Shack that I tied into the turn signal circuit. Right now I'm just running the GPS off of it. I need to wire up a charger for my iPhone, and ultimately the sear your retina driving lights I still need to hook up, and a full complement of heated gear. The Busa charging system will run all of that. Barely. I still need to wire up a voltage gauge so I can keep a real-time check on charging status. __________________

03-12-2009, 07:07 PM	#16
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	Hey I'm gonna leave the microwave and fridge at home. Ive learned over the years that I can keep food cold in the cooler with some ice, and if I need to cook the steaks I can do it on the exaust. I am slowly compiling parts to finish the upgrades. I will do a full write up when I am done. In the mean time I'm gonna start a parts list here so I don't forget. Fuse block in line glass fuse relay electrical connectors wire loom and this is slightly worse but similar to what I want it to look like. I'm using the same components. __________________ Last edited by derf; 03-12-2009 at 11:48 PM..

03-13-2009, 03:16 PM	#17
Amorok Issukangitok Join Date: Nov 2008 Location: Biloxi, MS Moto: '06 Suzuki Boulevard C50T Posts: 2,225	I wonder if I can upgrade my stator without building something. It would be nice. __________________ What goes around comes around. Sometimes you get what's coming around, and sometimes you are what's coming around. You see what I mean?