Awesoime!!! Engine isn't stuck - Page 9

pauldun170 · 04-11-2012, 10:15 PM

I did try the whack a driver first on all shady looking screw...except for the first one. I tore that one a new asshole before I realized I sabotaged my day.
Went for the dremel on the first one but then idealized the starter kit for my dremel is better suited to the pine derby race car I bought it for.

I wasn't going to ask because that would mean I have lick of sense.

No Worries · 04-12-2012, 12:29 AM

Here's my stripped screws. I used a hacksaw to make a groove in the screw and used a common-head screwdriver to take it out:

Then I put in hex-head screws (M4x0.7, 10mm long):

Here's how I clean the Keihin carbs on my CBR: http://cbrforum.com/forum/how-tos-81...needle-103846/

pauldun170 · 04-12-2012, 12:48 AM

Awesome...page bookmarked

pauldun170 · 04-13-2012, 01:28 PM

New spark plugs, headlight bulb and laser sight equipped infrared thermometer just showed up on the door step.

Guess which one of those items is getting played with right now?

askmrjesus · 04-13-2012, 01:31 PM

Quote:

Originally Posted by pauldun170

New spark plugs, headlight bulb and laser sight equipped infrared thermometer just showed up on the door step.

Guess which one of those items is getting played with right now?

You bought a laser sight equipped infrared thermometer?

What, the melted fender wasn't proof enough for you?

JC

pauldun170 · 04-13-2012, 02:32 PM

Quote:

Originally Posted by askmrjesus

You bought a laser sight equipped infrared thermometer?

What, the melted fender wasn't proof enough for you?

JC

Particle Man · 04-13-2012, 01:33 PM

Quote:

Originally Posted by pauldun170

Guess which one of those items is getting played with right now?

TMI, dude...

pauldun170 · 04-13-2012, 02:39 PM

Quote:

Originally Posted by Particle Man

TMI, dude...

At first I thought that TMI was an acronym for the thermometer and that I needed to stop referring to half the crap in my tool box as "thingies". That it was time to learn the common names of the all tools and technical names.

I still have learning to do.

but then i thought about it...
Particle Man thinks I'm pointing this thing at my wibbly bits while asking my wife "hot or cold"

He's right
too much information

Particle Man · 04-13-2012, 02:51 PM

Quote:

Originally Posted by pauldun170

At first I thought that TMI was an acronym for the thermometer and that I needed to stop referring to half the crap in my tool box as "thingies". That it was time to learn the common names of the all tools and technical names.

I still have learning to do.

but then i thought about it...
Particle Man thinks I'm pointing this thing at my wibbly bits while asking my wife "hot or cold"

He's right
too much information

See?

Sean · 04-13-2012, 05:09 PM

Those infrared thermos are neat. You can see the temperature variance across the tire, see which vents are blowing heat and which aren't, and make crème brûlée just perfect. I don't know what the fuck you'd do with it on a carb though.

04-12-2012, 12:29 AM	#2
No Worries Keyboard Racer Join Date: Feb 2008 Location: Mile High City Moto: Old Superbikes Posts: 1,016	Here's my stripped screws. I used a hacksaw to make a groove in the screw and used a common-head screwdriver to take it out: Then I put in hex-head screws (M4x0.7, 10mm long): Here's how I clean the Keihin carbs on my CBR: http://cbrforum.com/forum/how-tos-81...needle-103846/

04-13-2012, 05:09 PM	#10
Sean giggity Join Date: Nov 2008 Location: socal Moto: street, sumo & dirty Posts: 1,071	Those infrared thermos are neat. You can see the temperature variance across the tire, see which vents are blowing heat and which aren't, and make crème brûlée just perfect. I don't know what the fuck you'd do with it on a carb though.