Frame Sliders... - Page 2

Mr Lefty · 07-14-2008, 12:26 AM

well that and the wind protection...

go test them... it's only $50

Cutty72 · 07-14-2008, 12:29 AM

Quote:

Originally Posted by Ebbs15

well that and the wind protection...

go test them... it's only $50

They work in a tip over. only other scratch was little one on the clutch cover.

FYI, on the 1125, when it's in 2nd, you don't have to hold in the clutch to start it.

Mr Lefty · 07-14-2008, 12:32 AM

taking it the second caused the first

Cutty72 · 07-14-2008, 12:34 AM

Quote:

Originally Posted by Ebbs15

taking it the second caused the first

yup, puttin on helmet reach down hit starter, boom, bike on ground. huh...
Now i check the Neutral light before hitting start button...
still don't know why i left it in 2nd

oh and ebbs, looks like you need a shower.

Mr Lefty · 07-14-2008, 12:38 AM

yeah went to mudfest... I'll have more pics later on... I didn't take many... so I gotta get them from a friend.

got fuck'n fried though...

lots of gorgeous korean girls in bikini's... YUM... was in the ER with a bad case of Yellow Feaver

ceo012384 · 07-14-2008, 01:13 AM

Frame sliders are good if you get decent ones.

Don't buy no-cuts. They will help you in a tip-over but if you have any sort of serious crash they can fuck your bike over real bad.

Get woodcrafts. And don't spring for the metal pucks, they are worse. You want delrin pucks. I'm actually surprised woodcraft even offers the metal bling pucks... they are usually all about functionality.

DLIT · 07-14-2008, 01:49 AM

The no-cuts mount to your engine kount, Ebbs, not weaker points. Most of the no-cuts out there have shitty adapters and they aren't locked in place, making the adapter move up or down during a wreck and do more harm. This happened on my first bike, I had shitty no-cuts. So I smartened up and put Vortex on there during the fix. Vortex are a very good slider. They can handle a high speed wreck if it's just sliding on the tarmac or street. The person who bought my '04 R6 had a veru high speed wreck and the frame slider worked excellent. It slid and slid on it preventing much more potential damage. It was worn half way down, but it was still in the perfect cylinder shape, unlike many shitty quality sliders, they'll just warp and make it real hard to get it off.

I would say the best kind to get are the ones with the metal base and the puck attaches to it, like Vortex or Woodcraft. I had a buddy go down at the track this past Saturday and his frame slider held up pretty damn good preventing a bunch of damage, he just replaced his right rear set and he went back out.

Frame sliders are definately a great idea...as long as they're top quality ones.

Mr Lefty · 07-14-2008, 03:45 AM

Quote:

Originally Posted by DLIT

The no-cuts mount to your engine kount, Ebbs, not weaker points. Most of the no-cuts out there have shitty adapters and they aren't locked in place, making the adapter move up or down during a wreck and do more harm. This happened on my first bike, I had shitty no-cuts. So I smartened up and put Vortex on there during the fix. Vortex are a very good slider. They can handle a high speed wreck if it's just sliding on the tarmac or street. The person who bought my '04 R6 had a veru high speed wreck and the frame slider worked excellent. It slid and slid on it preventing much more potential damage. It was worn half way down, but it was still in the perfect cylinder shape, unlike many shitty quality sliders, they'll just warp and make it real hard to get it off.

I would say the best kind to get are the ones with the metal base and the puck attaches to it, like Vortex or Woodcraft. I had a buddy go down at the track this past Saturday and his frame slider held up pretty damn good preventing a bunch of damage, he just replaced his right rear set and he went back out.

Frame sliders are definately a great idea...as long as they're top quality ones.

actually... most no cut sliders I've seen mount to fairing tabs... not to the motor...

could be that most I've seen were for my bike and that's the easiest bolt to mount to

Amber Lamps · 07-14-2008, 07:44 AM

Yea I had Haris no cuts and the adapter bracket wrapped around the frame so it didn't move when I crashed. I think you can get good quality no cuts but I agree that for the most part you're better off with the cut in ones.

Trip · 07-14-2008, 08:31 AM

I highsided my bike at 108 mph and it stayed on the asphalt for the entire slide. I had R&G no cut sliders on the bike and I only sustained minimal rash to the bike and a broken rearset peg.

Sliders in general won't do a thing if a bike goes into gravel/grass and starts to tumble.

07-14-2008, 01:13 AM	#16
ceo012384 Pompous Prick Join Date: Mar 2008 Location: MA Moto: 06 R6 (race), 04 CRF Tard (race) Posts: 3,040	Frame sliders are good if you get decent ones. Don't buy no-cuts. They will help you in a tip-over but if you have any sort of serious crash they can fuck your bike over real bad. Get woodcrafts. And don't spring for the metal pucks, they are worse. You want delrin pucks. I'm actually surprised woodcraft even offers the metal bling pucks... they are usually all about functionality. __________________ LRRS/CCS #123 Boston Moto Dunlop Woodcraft 35 Motorsports Sidi Pit Bull K&N Filters

07-14-2008, 01:49 AM	#17
DLIT Clit Commander Join Date: Feb 2008 Location: Las Vegas Moto: 2012 Ducati 1199 Panigale S Posts: 4,189	The no-cuts mount to your engine kount, Ebbs, not weaker points. Most of the no-cuts out there have shitty adapters and they aren't locked in place, making the adapter move up or down during a wreck and do more harm. This happened on my first bike, I had shitty no-cuts. So I smartened up and put Vortex on there during the fix. Vortex are a very good slider. They can handle a high speed wreck if it's just sliding on the tarmac or street. The person who bought my '04 R6 had a veru high speed wreck and the frame slider worked excellent. It slid and slid on it preventing much more potential damage. It was worn half way down, but it was still in the perfect cylinder shape, unlike many shitty quality sliders, they'll just warp and make it real hard to get it off. I would say the best kind to get are the ones with the metal base and the puck attaches to it, like Vortex or Woodcraft. I had a buddy go down at the track this past Saturday and his frame slider held up pretty damn good preventing a bunch of damage, he just replaced his right rear set and he went back out. Frame sliders are definately a great idea...as long as they're top quality ones. __________________ Dress for the crash. Not the ride.

07-14-2008, 12:26 AM	#11
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	well that and the wind protection... go test them... it's only $50

07-14-2008, 12:32 AM	#13
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	taking it the second caused the first

07-14-2008, 12:38 AM	#15
Mr Lefty TWFix Legend Join Date: Feb 2008 Location: Denver CO Moto: 01 BMW F650GS Dakar Posts: 15,677	yeah went to mudfest... I'll have more pics later on... I didn't take many... so I gotta get them from a friend. got fuck'n fried though... lots of gorgeous korean girls in bikini's... YUM... was in the ER with a bad case of Yellow Feaver

07-14-2008, 07:44 AM	#19
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	Yea I had Haris no cuts and the adapter bracket wrapped around the frame so it didn't move when I crashed. I think you can get good quality no cuts but I agree that for the most part you're better off with the cut in ones.