Calling FT BSTRD! - Page 2

marko138 · 05-19-2010, 10:08 AM

Quote:

Originally Posted by Amber Lamps

Oh so DDM is a bunch of "goons" but Buell gets a pass?....

Ugh, yeah asshole.

Trip · 05-19-2010, 10:12 AM

Quote:

Originally Posted by Amber Lamps

Oh so DDM is a bunch of "goons" but Buell gets a pass?....

It's not as much fun making fun of the dead as when it was alive.

Cutty72 · 05-19-2010, 10:22 AM

Quote:

Originally Posted by Dnyce

clutch cover "went out" ?

wtf?

There are some O-rings in the secondary clutch actuator that didn't hold real well on the 08's. apparently I am a god getting mine to last to 9400 miles.

Quote:

Originally Posted by tommymac

I am wondering if I should just order the stuff ahead of time so I can do the swap when/if it happens. Minimize the bikes downtime.

Your's may be under warranty when they go out, then it would be covered.

Quote:

Originally Posted by Amber Lamps

Oh so DDM is a bunch of "goons" but Buell gets a pass?....

You can actually talk to a person at Buell and try to get resolution to the prob, not so much the case at DDM.

marko138 · 05-19-2010, 11:26 AM

Quote:

Originally Posted by Cutty72

There are some O-rings in the secondary clutch actuator that didn't hold real well on the 08's. apparently I am a god getting mine to last to 9400 miles.

Your's may be under warranty when they go out, then it would be covered.

You can actually talk to a person at Buell and try to get resolution to the prob, not so much the case at DDM.

Wasn't that a recall?

Cutty72 · 05-19-2010, 12:53 PM

Quote:

Originally Posted by marko138

Wasn't that a recall?

Should be, as I believe that 95% or more of the 08's have had it done, and quite a few of the 09's as well.
Maybe that's why Buell never did a recall, they figured all the bad ones got replaced with upgraded parts under warranty anyway.

Sadly, that is not the case with mine.

Did finally convince the dealer to cover the cost of parts. This way I can throw it back at them if they don't do it right. Also, not going to be around this weekend to work on it anyway, so probably about the same timeline to get it back (I hope).

Gotta give a huge thanks to FT BSTRD and the guys at Bumpus. I had emails and the info I needed right away this morning. That should at least get me the right parts.
Will be ordering all my parts from them going forward!

Cutty72 · 05-19-2010, 03:32 PM

I can't even remember what was displayed on the old 08 cluster.

I do also like the mileage instant/average. it's actually fairly accurate as well.

tommymac · 05-19-2010, 03:35 PM

Quote:

Originally Posted by Cutty72

I can't even remember what was displayed on the old 08 cluster.

I do also like the mileage instant/average. it's actually fairly accurate as well.

I like how it shows how many miley you have gone when it hits reserve, I think guys said you hit 28 miles or so and youre done

Cutty72 · 05-19-2010, 03:36 PM

Quote:

Originally Posted by tommymac

I like how it shows how many miley you have gone when it hits reserve, I think guys said you hit 28 miles or so and youre done

I got 25. That was pre-drummer however. It is far more efficient now.

It's fun though to get that to come on, then weave side to side hard and slosh the gas around, and reset it.

tommymac · 05-19-2010, 03:38 PM

Quote:

Originally Posted by Cutty72

I got 25. That was pre-drummer however. It is far more efficient now.

It's fun though to get that to come on, then weave side to side hard and slosh the gas around, and reset it.

i will have to try that

marko138 · 05-19-2010, 08:20 PM

Quote:

Originally Posted by Cutty72

I got 25. That was pre-drummer however. It is far more efficient now.

It's fun though to get that to come on, then weave side to side hard and slosh the gas around, and reset it.

Mine will only reset if the gas light has been off for something like 3 miles.