Anyone shorty a mufler? - Page 2

Tmall · 06-20-2009, 07:23 PM

Quote:

Originally Posted by TIGGER

That's what I thought too. Heck, even the GSXR750 was beating them... Anyway, I thought that the length of the muffler could alter the hp and tq characteristics of an engine... I guess I was wrong.

Sorry if I stepped on your toes Bro, I was giving honest advice based on what I thought was right.

It would and does effect the performance.

Buell uses a long path for low rpm in the xbs and short for higher revs.

When I rigged it so I was using the short path, I lost low end power.

Amber Lamps · 06-20-2009, 08:30 PM

Quote:

Originally Posted by Tmall

It would and does effect the performance.

Buell uses a long path for low rpm in the xbs and short for higher revs.

When I rigged it so I was using the short path, I lost low end power.

That's what would think too...

Rangerscott · 06-21-2009, 01:38 AM

Now my bike felt sluggish when I took off the muff and mid pipe. Even though it has a cat it felt slower getting up to speed. But between the shorty I have and the long scorpion (dont know what its really meant for), I couldnt tell.

Tmall · 06-21-2009, 08:31 AM

Its simple really. Any kind of pipe or hose has an internal resistance to flow.

The longer it is, the higher the resistance.

A shorter path would produce less back pressure unless you throw some bends to compensate, or as some people do throw an adjustable baffle in the exhaust path. Then you can adjust the flow restriction accordingly. (this is usually a washer on the end of a bolt threaded into the headed or midpipe)

marko138 · 06-23-2009, 04:37 PM

Quote:

Originally Posted by Tmall

Its simple really. Any kind of pipe or hose has an internal resistance to flow.

The longer it is, the higher the resistance.

A shorter path would produce less back pressure unless you throw some bends to compensate, or as some people do throw an adjustable baffle in the exhaust path. Then you can adjust the flow restriction accordingly. (this is usually a washer on the end of a bolt threaded into the headed or midpipe)

You a smart motherfucker.

06-21-2009, 01:38 AM	#13
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Now my bike felt sluggish when I took off the muff and mid pipe. Even though it has a cat it felt slower getting up to speed. But between the shorty I have and the long scorpion (dont know what its really meant for), I couldnt tell.

06-21-2009, 08:31 AM	#14
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	Its simple really. Any kind of pipe or hose has an internal resistance to flow. The longer it is, the higher the resistance. A shorter path would produce less back pressure unless you throw some bends to compensate, or as some people do throw an adjustable baffle in the exhaust path. Then you can adjust the flow restriction accordingly. (this is usually a washer on the end of a bolt threaded into the headed or midpipe)