Belly up to the bar....

[ceo012384]

Originally Posted by DLIT

I'm gonna look up the torque requirements on that bitch.

You weren't properly torqueing the axle already anyways?!?

Originally Posted by DLIT

Christ. That bearing has seen better days.

You should be able to get that out pretty easily with a bearing puller as long as the inner race doesn't disintegrate when you try to grab it, maybe add a little heat too.

[DLIT]

Originally Posted by ceo012384

You weren't properly torqueing the axle already anyways?!?

Christ. That bearing has seen better days.

You should be able to get that out pretty easily with a bearing puller as long as the inner race doesn't disintegrate when you try to grab it, maybe add a little heat too.

Hell no, I don't use torque wrenches, I do now though.

I don't have a bearing puller or heat. I'm bringing it to the dealer. It might be covered under warranty, too. I just won't tell them I over-torqued the wrong spacer and see if they'll bite. That's the benefit of bringing the wheel in lose. They can't tell I used the wrong spacer. If not, it's not that expensive to replce. Like $30.

[ceo012384]

Originally Posted by DLIT

Hell no, I don't use torque wrenches, I do now though.

I don't have a bearing puller or heat. I'm bringing it to the dealer. It might be covered under warranty, too. I just won't tell them I over-torqued the wrong spacer and see if they'll bite. That's the benefit of bringing the wheel in lose. They can't tell I used the wrong spacer. If not, it's not that expensive to replce. Like $30.

Your torque wrench is your best friend. A little tip: to keep it accurate always turn it back to 0 ftlb before you put it away and never use it to loosen anything.

Yeah bringing the wheel in loose will also not let them know you've been tracking the shit out of the thing

[DLIT]

Originally Posted by ceo012384

Your torque wrench is your best friend. A little tip: to keep it accurate always turn it back to 0 ftlb before you put it away and never use it to loosen anything.

Yeah bringing the wheel in loose will also not let them know you've been tracking the shit out of the thing

It's not my track wheel, it's my street wheel. We use torque wrenches a lot here at work. We have to cycle 'em at the highest setting 5 times before we use 'em and put 'em away at the lowest setting. I'm just gonna pick up a 30 dollar job at Autozone.

[ceo012384]

Originally Posted by DLIT

I'm just gonna pick up a 30 dollar job at Autozone.

As long as you treat them well a cheap torque wrench is great.

I've seen snapons WAY out of calibration, and a well cared for cheapo from harbor-freight be spot-on.

[Dnyce]

calibrated elbow only gets you so far lol

[DLIT]

Originally Posted by Dnyce

calibrated elbow only gets you so far lol

Too far in my case, haha.

[Dnyce]

hey since you got the wheel off- can u do me a favor and measure the distance from the brake disc to the sprocket for me

[DLIT]

Originally Posted by Dnyce

hey since you got the wheel off- can u do me a favor and measure the distance from the brake disc to the sprocket for me

If I had a tape measure or ruler, I would.

[Cutty72]

Originally Posted by DLIT

If I had a tape measure or ruler, I would.

Jesus... do you own ANY tools???