Night Shift Cafe - Page 3

Trip · 11-15-2010, 09:14 PM

Quote:

Originally Posted by Particle Man

I meant to tip the cart

They would just absorb any momentum...

put a hamburger in their path, when they reach over on one side to get it, bust them on the other side like you are Nick Fairley and they are the Georgia QB.

Rangerscott · 11-15-2010, 09:14 PM

Also a tub of lard.

http://www.youtube.com/watch?v=puy52...eature=channel

http://www.youtube.com/watch?v=cHgIQYvv9kk

Particle Man · 11-15-2010, 09:15 PM

Interesting idea...

And there IS a Wendy's across the way from my gate...

caveman · 11-15-2010, 09:18 PM

well, thats two plants that have tripped early going into their outage. Fermi 2 did the same thing only we tripped about 10 hours earlier than we wanted to manually scram.
Now we are being plagued with all sorts of issues that are small in nature but are starting to really pile up. Seems like we will never get out of this outage. we are like 180 hrs behind schedule and not getting any better.
We replaced two pump motors one for our Heater feed pump and one for our N. Main condenser pump. the mechanics installing the HFP ^ are real genius's let me tell ya. They put on the coupler while it was off the stand as there was more room and easier to get to so when they were lining up the couplers for the pump they used a tool to align the two halves of the coupling. Bar is approx. 10-12 inches long 2.5 inches wide and about 1/2 thick with two 3 inch bolts that pass through the two halves. thing must weigh at least 2-3 lbs. when the ran the motor for vibes uncuopled to the pump they couldn't figure out why the vibes were at near the no use limit of .60 mils deflection with a reading of .58 mils deflection during the test. Well, duh, you left the alignment bar attached which is off center caused major vibration issues. who woulda thought? well, lets try it without the alignment tool and see how she goes. Yeah, vibe readings went down to .08 mil deflection, which will prolly go down even more once coupled with the pump. MORONS.
Well more to follow got to get out there and do my rounds. I actually have field work I have to do. be on later

Particle Man · 11-15-2010, 09:22 PM

Geez Caveman - I like my posts about tipping cart-riding fat people over better...

Trip · 11-15-2010, 09:22 PM

Quote:

Originally Posted by caveman

well, thats two plants that have tripped early going into their outage. Fermi 2 did the same thing only we tripped about 10 hours earlier than we wanted to manually scram.
Now we are being plagued with all sorts of issues that are small in nature but are starting to really pile up. Seems like we will never get out of this outage. we are like 180 hrs behind schedule and not getting any better.
We replaced two pump motors one for our Heater feed pump and one for our N. Main condenser pump. the mechanics installing the HFP ^ are real genius's let me tell ya. They put on the coupler while it was off the stand as there was more room and easier to get to so when they were lining up the couplers for the pump they used a tool to align the two halves of the coupling. Bar is approx. 10-12 inches long 2.5 inches wide and about 1/2 thick with two 3 inch bolts that pass through the two halves. thing must weigh at least 2-3 lbs. when the ran the motor for vibes uncuopled to the pump they couldn't figure out why the vibes were at near the no use limit of .60 mils deflection with a reading of .58 mils deflection during the test. Well, duh, you left the alignment bar attached which is off center caused major vibration issues. who woulda thought? well, lets try it without the alignment tool and see how she goes. Yeah, vibe readings went down to .08 mil deflection, which will prolly go down even more once coupled with the pump. MORONS.
Well more to follow got to get out there and do my rounds. I actually have field work I have to do. be on later

We were suppose to have a maintenance outage in october. They rescheduled it. It was suppose to be this weekend, but our sister plants are in a refueling outage and we were waiting for them to come back online. We had a relay burn up, so we just chose to come down and entered our maintenance outage early. Not going to refuel til spring.

KSGregman · 11-15-2010, 10:02 PM

Slow going here in Kansas....bored watching the Philly vs Washington game on my big screen.

Adeptus_Minor · 11-15-2010, 10:34 PM

I'll be here with ya.
I worked my two 12's over the weekend, but tonight and tomorrow are my usual 11p-7a.

Plus, starting at the end of this month and carrying on until January, they're requesting extra coverage for the weekend.
Our nodal market system is going live and they figure we'll be fielding a lot of MP calls.

Dave · 11-15-2010, 10:43 PM

Quote:

Originally Posted by KSGregman

Slow going here in Kansas....bored watching the Philly vs Washington game on my big screen.

mcnabb looking like a bitch could never be boring

Rangerscott · 11-15-2010, 10:46 PM

Any of ya'll know about doing trade ins?

11-15-2010, 09:18 PM	#24
caveman mmmm, Beeeer Join Date: Jun 2009 Location: South of the D Michigan Moto: 08 HD Ultra Posts: 582	well, thats two plants that have tripped early going into their outage. Fermi 2 did the same thing only we tripped about 10 hours earlier than we wanted to manually scram. Now we are being plagued with all sorts of issues that are small in nature but are starting to really pile up. Seems like we will never get out of this outage. we are like 180 hrs behind schedule and not getting any better. We replaced two pump motors one for our Heater feed pump and one for our N. Main condenser pump. the mechanics installing the HFP ^ are real genius's let me tell ya. They put on the coupler while it was off the stand as there was more room and easier to get to so when they were lining up the couplers for the pump they used a tool to align the two halves of the coupling. Bar is approx. 10-12 inches long 2.5 inches wide and about 1/2 thick with two 3 inch bolts that pass through the two halves. thing must weigh at least 2-3 lbs. when the ran the motor for vibes uncuopled to the pump they couldn't figure out why the vibes were at near the no use limit of .60 mils deflection with a reading of .58 mils deflection during the test. Well, duh, you left the alignment bar attached which is off center caused major vibration issues. who woulda thought? well, lets try it without the alignment tool and see how she goes. Yeah, vibe readings went down to .08 mil deflection, which will prolly go down even more once coupled with the pump. MORONS. Well more to follow got to get out there and do my rounds. I actually have field work I have to do. be on later __________________ Heres my 10¢, my 2¢ are free. Caveman

11-15-2010, 10:34 PM	#28
Adeptus_Minor Hopster Join Date: Nov 2008 Location: Austin, TX Moto: 2009 Buell 1125R Posts: 4,743	I'll be here with ya. I worked my two 12's over the weekend, but tonight and tomorrow are my usual 11p-7a. Plus, starting at the end of this month and carrying on until January, they're requesting extra coverage for the weekend. Our nodal market system is going live and they figure we'll be fielding a lot of MP calls. __________________ “Well, obviously before; after was all gendarmes and dick stitches.”

11-15-2010, 09:14 PM	#22
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Also a tub of lard. http://www.youtube.com/watch?v=puy52...eature=channel http://www.youtube.com/watch?v=cHgIQYvv9kk

11-15-2010, 09:15 PM	#23
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	Interesting idea... And there IS a Wendy's across the way from my gate...

11-15-2010, 09:22 PM	#25
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	Geez Caveman - I like my posts about tipping cart-riding fat people over better...

11-15-2010, 10:02 PM	#27
KSGregman Get Fit...or Get OUT Join Date: Nov 2008 Location: KS Moto: 07 M109-R Posts: 1,993	Slow going here in Kansas....bored watching the Philly vs Washington game on my big screen.

11-15-2010, 10:46 PM	#30
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Any of ya'll know about doing trade ins?