1971 Honda CL70 restoration - Page 5

'73 H1 Triple · 02-13-2011, 06:08 PM

Pine Sol may be alright for slightly dirty carbs but I've had better luck with Berrymans Carb Cleaner. I got mine at Auto Zone, it comes in a gallon size metal container ( think one gallon paint can ) with a basket for dipping.

That stuff works great. I've had great success with both kawasaki triple carbs and even with a cub cadet carb that had what remained from 12 year old gas.

In addition to soaking, you need to poke the various passages with wire to make sure they are clear. ( oxy acetelene cutting torch tip cleaner work great ) Follow with compressed air.

Here's a picture of a carb from my H1, all these passages must be perfectly cleaned or it won't run correctly.

Jeff

Rangerscott · 02-14-2011, 12:20 AM

I was just going an eco way.

Rangerscott · 02-24-2011, 09:35 AM

Vids are in order.

http://www.youtube.com/watch?v=iZeqaChzy0c

http://www.youtube.com/watch?v=NGsmdwmyqoI

http://www.youtube.com/watch?v=N567RDu_2DM

http://www.youtube.com/watch?v=FLz0cM95zTA

http://www.youtube.com/watch?v=744OuAqtOIY

http://www.youtube.com/watch?v=ZxVeQJciB4o

Rangerscott · 02-24-2011, 02:23 PM

The knock off carb seems to be doing better. Tooker her for a spin yesterday and I am still having the bogging problem. I can get it to go with just barely any throttle but any more and it just bogs down. Im guessing bigger main jet? I started with a stock 75 and went to an 88. I guess it helped some.

Going to adjust the needle clip so the needle opens more. If that doesnt help then I have a spare 75 jet thatll I'll drill out.

Amber Lamps · 02-24-2011, 07:31 PM

Quote:

Originally Posted by Rangerscott

The knock off carb seems to be doing better. Tooker her for a spin yesterday and I am still having the bogging problem. I can get it to go with just barely any throttle but any more and it just bogs down. Im guessing bigger main jet? I started with a stock 75 and went to an 88. I guess it helped some.

Going to adjust the needle clip so the needle opens more. If that doesnt help then I have a spare 75 jet thatll I'll drill out.

bogging=too much gas...usually. Also, move your needle clip so the jet is more "plugged" at rest/idle.

Rangerscott · 02-24-2011, 09:31 PM

Quote:

Originally Posted by Amber Lamps

bogging=too much gas...usually. Also, move your needle clip so the jet is more "plugged" at rest/idle.

Ok. I'll give it a shot. The wind was blowing today so didnt get her out. I'm soldering new O2 sensors for the VFR right.

gregorytoddsmith · 06-02-2011, 10:18 PM

Hey, man. I'm working on a 69 CL70 in Louisiana. You have a million pictures posted of your breakdown, so you're definitely a resource I'll refer back to. But, my question is - how did you end up getting the old petcock valve out of the tank? The first thing I'm doing to this bike before I try to make it run is paint it and rebuild the brakes and everything. But to paint the tank, I need to get that valve off.

Rangerscott · 05-05-2013, 01:48 PM

Dusted her off and she started the first kick. She idles and ai can use about 5-10% throttle then he bogs. If put my fingers in front of the throat I can feel gas.

Changed jets adjusted float, doesnt matter.

Rangerscott · 05-26-2013, 10:32 PM

Got a great deal on a 125cc pit bike. Got it in the CL70, but the gears are shorter since its for a dirt bike. Gonna have to order some sprockets.

Rangerscott · 06-22-2013, 11:44 PM

Changed the sprockets from 13/47 to 15/39. Talk about a world of difference. I got her up to 55mph. LOL I think any faster and I would have either gone back in time or road rashed to death from the bike falling apart.

People probably hear a bunch of rattling and shit, wondering what the heal is passing by. HAHA

06-02-2011, 10:18 PM	#47
gregorytoddsmith Squid Join Date: Jun 2011 Posts: 1	To Rangerscott Hey, man. I'm working on a 69 CL70 in Louisiana. You have a million pictures posted of your breakdown, so you're definitely a resource I'll refer back to. But, my question is - how did you end up getting the old petcock valve out of the tank? The first thing I'm doing to this bike before I try to make it run is paint it and rebuild the brakes and everything. But to paint the tank, I need to get that valve off.

02-13-2011, 06:08 PM	#41
'73 H1 Triple restorer of the original Join Date: Mar 2008 Location: Zionsville,PA Moto: '93 ZR1100 &'73 Kawasaki H1 500 Posts: 1,331	Pine Sol may be alright for slightly dirty carbs but I've had better luck with Berrymans Carb Cleaner. I got mine at Auto Zone, it comes in a gallon size metal container ( think one gallon paint can ) with a basket for dipping. That stuff works great. I've had great success with both kawasaki triple carbs and even with a cub cadet carb that had what remained from 12 year old gas. In addition to soaking, you need to poke the various passages with wire to make sure they are clear. ( oxy acetelene cutting torch tip cleaner work great ) Follow with compressed air. Here's a picture of a carb from my H1, all these passages must be perfectly cleaned or it won't run correctly. Jeff

02-14-2011, 12:20 AM	#42
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	I was just going an eco way.

02-24-2011, 09:35 AM	#43
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Vids are in order. http://www.youtube.com/watch?v=iZeqaChzy0c http://www.youtube.com/watch?v=NGsmdwmyqoI http://www.youtube.com/watch?v=N567RDu_2DM http://www.youtube.com/watch?v=FLz0cM95zTA http://www.youtube.com/watch?v=744OuAqtOIY http://www.youtube.com/watch?v=ZxVeQJciB4o

02-24-2011, 02:23 PM	#44
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	The knock off carb seems to be doing better. Tooker her for a spin yesterday and I am still having the bogging problem. I can get it to go with just barely any throttle but any more and it just bogs down. Im guessing bigger main jet? I started with a stock 75 and went to an 88. I guess it helped some. Going to adjust the needle clip so the needle opens more. If that doesnt help then I have a spare 75 jet thatll I'll drill out.

05-05-2013, 01:48 PM	#48
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Dusted her off and she started the first kick. She idles and ai can use about 5-10% throttle then he bogs. If put my fingers in front of the throat I can feel gas. Changed jets adjusted float, doesnt matter.

05-26-2013, 10:32 PM	#49
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Got a great deal on a 125cc pit bike. Got it in the CL70, but the gears are shorter since its for a dirt bike. Gonna have to order some sprockets.

06-22-2013, 11:44 PM	#50
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Changed the sprockets from 13/47 to 15/39. Talk about a world of difference. I got her up to 55mph. LOL I think any faster and I would have either gone back in time or road rashed to death from the bike falling apart. People probably hear a bunch of rattling and shit, wondering what the heal is passing by. HAHA