Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 02-29-2008, 10:37 AM   #1
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Thumbs up Condor Wheel Chock

I wanted to get one to replace the vise on the direct lift but I need it to work for the wife's (standard) bike and my chopper (chopper cradle), plus work on the lift and the ground.

Well we all know the direct lifts come with the vise. But its tricky to get off the bike and clamp in... and we have all heard of guys dropping the bikes off the lift. Well I don't want that.

Condor Products

I got the pitstop itself from my parts lady.

I had to order the trailer adapter, boomarang bar, and chopper cradle from condor directly

In total $362 this way due to savings thru my lady (who ordered thru Kury).

If all you want is the chopper setup, then you can order just that directly $300 + S&H (which is high cause its HEAVY). Nobody else carries the chopper pieces (too new). The chopper setup includes the boomarang bar (support for the stretched out choppers), the trailer kit, and the chopper cradle instead of the standard (to clear the low fenders).

But for me its cheaper to order the PitStop with out the added pieces from my parts lady then the other pieces from them.
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 02-29-2008, 10:38 AM   #2
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

So now that I have explained the financials, lets get done to the good stuff.

The condor pieces

Pit Stop


Boomarang bar


Trailer Kit


Chopper cradle


Assemble the pit stop and boomarang bar (have to use wife's sporty cause chop is still at the dealer).




And it works so well on the ground. Will be great for detailing, washing, using it during trailering, calander shoots, or who knows.




__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 02-29-2008, 10:39 AM   #3
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

Now lets look at what I have stock on the direct lift


Get that crap off


Naked lift


Get the chopper extension out for now use, due to the condor sets the bike back farther.


Pull the front bar out to get the extension on and pull my strap points off. Have to keep it strapped so the sections don't try to seperate and pinch the bar.


Slide it all back together but still nothing to hold the front tire.


Attach the trailer kit to the lift, after measuring its placement 4 times and trial fitting the condor in its place. Then drill the holes and bolt it.


Attach the pieces to the condor that slide it into place. These slide into the keyholes that are now attached to the lift.


Slide it into place and secure further with the thumb screw. This sucker isn't going anywhere.

__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 02-29-2008, 10:39 AM   #4
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

Damn this thing is a nice piece.



And the sporty racked in

__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 02-29-2008, 10:40 AM   #5
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

Well I fit the chop to the condor... on the first recomended setting #1. The chaulk went right under the fender... very nicely and with NO room to spare... we did it twice to see if it was a fluke!!

The chopper chaulk






__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 02-29-2008, 10:49 AM   #6
DLIT
Clit Commander
 
DLIT's Avatar
 
Join Date: Feb 2008
Location: Las Vegas
Moto: 2012 Ducati 1199 Panigale S
Posts: 4,189
Default

Nice set-up. Why does it look like your rotors are grooved?
__________________
Dress for the crash.
Not the ride.

DLIT is offline   Reply With Quote
Old 02-29-2008, 09:32 PM   #7
Mr Lefty
TWFix Legend
 
Mr Lefty's Avatar
 
Join Date: Feb 2008
Location: Denver CO
Moto: 01 BMW F650GS Dakar
Posts: 15,677
Default

Nice... still plan'n on one of these when I get to CO
Mr Lefty is offline   Reply With Quote
Old 02-29-2008, 10:08 PM   #8
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

Quote:
Originally Posted by DLIT View Post
Nice set-up. Why does it look like your rotors are grooved?
The flash... same reason why it makes polished metal dull and chrome yellow
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.