$600 AR-15 bargain bin sale

Rangerscott · 03-26-2010, 05:18 PM

http://cmmginc.secure-mall.com/shop/?shop=1&cat=161&

Regular - $600

Chromed - $650

The good: Price

The bad: You don't get to call and pick what brand you want.

*edit*

Nevermind. There's a pull down tab for $25 gand pick.

Cutty72 · 03-26-2010, 07:00 PM

Not worth it. I want to know what i'm getting in a firearm.

smileyman · 03-26-2010, 07:39 PM

In .223 no way, .308 I'll take two!!!

goof2 · 03-26-2010, 07:58 PM

I'd rather get a custom kit and a striped lower from someplace like del-ton. I'd get exactly what I want, it would be new, and it would only be a couple hundred more. If you went with their basic kit and basic lower it actually works out to be cheaper.

Adeptus_Minor · 03-26-2010, 08:12 PM

Doesn't seem too bad, actually. Particularly if you were going to build out a couple of rifles.
You could always break it down and swap parts around.

nhgunnut · 03-27-2010, 04:34 PM

They say it up front . They aint pretty, If I were going from scratch I would take one of these the only place that is iffy will be head spacing and the bolt and they aren't going to let a bad one out of the shop. worst case you gun coat it and swap the lower for a Branded one.

Smittie61984 · 03-29-2010, 08:07 PM

I wouldn't mind getting one, but odds are I'd end up with a Bushmaster and I'll find out that everyone else got Colts.

03-26-2010, 05:18 PM	#1
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	$600 AR-15 bargain bin sale http://cmmginc.secure-mall.com/shop/?shop=1&cat=161& Regular - $600 Chromed - $650 The good: Price The bad: You don't get to call and pick what brand you want. edit Nevermind. There's a pull down tab for $25 gand pick. Last edited by Rangerscott; 03-28-2010 at 12:18 PM..

03-26-2010, 07:39 PM	#3
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	In .223 no way, .308 I'll take two!!! __________________ Arkriders.com To be the best you must first be willing to risk the worst!

03-26-2010, 08:12 PM	#5
Adeptus_Minor Hopster Join Date: Nov 2008 Location: Austin, TX Moto: 2009 Buell 1125R Posts: 4,743	Doesn't seem too bad, actually. Particularly if you were going to build out a couple of rifles. You could always break it down and swap parts around. __________________ “Well, obviously before; after was all gendarmes and dick stitches.”

03-27-2010, 04:34 PM	#6
nhgunnut gun totin redneck Join Date: Apr 2008 Location: South West New Hampshire Moto: turbo busa 999 Duc Goldwing & Victory Posts: 1,130	They say it up front . They aint pretty, If I were going from scratch I would take one of these the only place that is iffy will be head spacing and the bolt and they aren't going to let a bad one out of the shop. worst case you gun coat it and swap the lower for a Branded one. __________________ Evolution requires a body count, Count or be Counted!

03-29-2010, 08:07 PM	#7
Smittie61984 I give Squids a bad name Join Date: Mar 2008 Location: Fly Over State Moto: 1996 CBR600 F3 (AKA the Flying Turd) Posts: 4,742	I wouldn't mind getting one, but odds are I'd end up with a Bushmaster and I'll find out that everyone else got Colts. __________________ lifts - R.I.P.

03-26-2010, 07:58 PM	#4
goof2 AMA Supersport Join Date: Feb 2009 Posts: 4,756	I'd rather get a custom kit and a striped lower from someplace like del-ton. I'd get exactly what I want, it would be new, and it would only be a couple hundred more. If you went with their basic kit and basic lower it actually works out to be cheaper.