Killer cleaner

CasterTroy · 03-13-2011, 05:38 PM

OK so I've had a red stain on the RMZ since I took it to Uwharrie National forrest last December. I mean I pressure wash it, purple power it...doesn't matter....it's red.

The previous owner of the DRZ400E I just bought, amazed me with such clean bikes.....and I asked WTH he used. He turned me onto HAWKEYE Brite 1

You can only GET it at NAPA in Hickory, NC though as it's a local to that area chemical company that makes it

But the chemical company itself is Here if you can get ahold of anyone

Anyway...the P.O. of the DRZ was up there last monday and I asked him to get me some.

I used it yesterday and HO LEE CRAP whatta difference

Here is the frame where I started on the lower part

Next, the radiator and frame BEFORE: (yes this is AFTER a pressure wash and purple power)

And AFTER

And I'm talking NO EFFORT.

Spray it on...wait till it foams white (3-5 seconds) pressure wash off.

The WHEEL hubs were a MAJOR change...though the pics don't do it justice

Before:

After:

I LOVE this stuff!!!!

Avatard · 03-13-2011, 06:17 PM

Looks like awesome shit. I'm gonna hunt some down, thanks.

Particle Man · 03-13-2011, 06:33 PM

Sweet

TYEster · 03-13-2011, 06:54 PM

1. How does it hold up to plastics?

2. Environmentally friendly when washed off in the yard?

I REALLY want some as CycleRanchMX.com is a regular place we ride, PACKED with red clay/sand mix which stains everything including head pipes to a nice burnt UT Longhorn orange.

shmike · 03-13-2011, 10:41 PM

Spam.

All I see is a bike with one dirty side and one clean side.

CasterTroy · 03-14-2011, 08:30 AM

Quote:

Originally Posted by TYEster

1. How does it hold up to plastics?

Unaffected as far as I could tell. Would not even touch the dirt on the plastics. Or steel for that matter. only worked on the aluminum parts. And the plastics did not discolor, or change. Bob has been using it for a while now so I'm sure if it had changed his plastics in ANY way he'd have warned me of that.

Quote:

Originally Posted by TYEster

2. Environmentally friendly when washed off in the yard?

As far as I could tell. There were no indications of any grass wilting or changing states yesterday. But something that works THIS well is sure to cause the spotted owl to grow a third testicle or something

I'll go check the label tonight.

I was sure to dilute the bike, drive and yard with PLENTY of water when I rinsed it.

Quote:

Originally Posted by shmike

Spam.

All I see is a bike with one dirty side and one clean side.

I didn't expect it to work SO well. So I never bothered to take before pics of the first side

jtemple · 03-14-2011, 09:39 AM

Is there any online source for this stuff?

CasterTroy · 03-14-2011, 09:50 AM

Quote:

Originally Posted by jtemple

Is there any online source for this stuff?

First post

Quote:

Originally Posted by CasterTroy

But the chemical company itself is Here if you can get ahold of anyone

jtemple · 03-14-2011, 09:52 AM

Quote:

Originally Posted by CasterTroy

First post

I looked there. The website is a piece of shit. None of the links even work. It's just a bunch of text on a page. I suppose I could jump through the hoops of emailing and/or calling them, but I don't need it that badly.

I do see "Updating store, ability to purchase will be soon." on there. Maybe someday.

I suppose if it's only good on AL, it's not much use to me. My frame is steel.

CasterTroy · 03-14-2011, 10:12 AM

Yeah the phone call is really the only way (that I know of) right now.

They're a small company. But the stuff is magic.

But you could STILL benefit with your hubs and engine! Honestly the HUBS were why I got it. The rest...well, I COULD have used a scotchbrite pad and cleaned, but those hubs are a BITCH to clean, and I HATE having crappy looking wheels, even though I know I spend a boatload of time cleaning them.

Some people think I'm nuts for cleaning a friggin DIRTBIKE the way I do, but I can't stand having anything in the garage looking all dirty or half-ass. Plus it makes me feel pretty good when I unload my bikes, and I get people walking over to look at them, telling me I have nice bikes, and asking if they're new.

To me....It's either done RIGHT, or whole-assed

03-13-2011, 05:38 PM	#1
CasterTroy ................ Join Date: Nov 2008 Location: NC Posts: 3,028	Killer cleaner OK so I've had a red stain on the RMZ since I took it to Uwharrie National forrest last December. I mean I pressure wash it, purple power it...doesn't matter....it's red. The previous owner of the DRZ400E I just bought, amazed me with such clean bikes.....and I asked WTH he used. He turned me onto HAWKEYE Brite 1 You can only GET it at NAPA in Hickory, NC though as it's a local to that area chemical company that makes it But the chemical company itself is Here if you can get ahold of anyone Anyway...the P.O. of the DRZ was up there last monday and I asked him to get me some. I used it yesterday and HO LEE CRAP whatta difference Here is the frame where I started on the lower part Next, the radiator and frame BEFORE: (yes this is AFTER a pressure wash and purple power) And AFTER And I'm talking NO EFFORT. Spray it on...wait till it foams white (3-5 seconds) pressure wash off. The WHEEL hubs were a MAJOR change...though the pics don't do it justice Before: After: I LOVE this stuff!!!! __________________ “Being tolerant does not mean that I share another one’s belief. But it does mean that I acknowledge another one’s right to believe, and obey, his own conscience.” Viktor Frankl

03-13-2011, 06:17 PM	#2
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	Looks like awesome shit. I'm gonna hunt some down, thanks. __________________ Insert free thought here.

03-13-2011, 10:41 PM	#5
shmike Follower Join Date: Nov 2008 Posts: 5,549	Spam. All I see is a bike with one dirty side and one clean side. __________________ Racing For Smiles

03-14-2011, 10:12 AM	#10
CasterTroy ................ Join Date: Nov 2008 Location: NC Posts: 3,028	Yeah the phone call is really the only way (that I know of) right now. They're a small company. But the stuff is magic. But you could STILL benefit with your hubs and engine! Honestly the HUBS were why I got it. The rest...well, I COULD have used a scotchbrite pad and cleaned, but those hubs are a BITCH to clean, and I HATE having crappy looking wheels, even though I know I spend a boatload of time cleaning them. Some people think I'm nuts for cleaning a friggin DIRTBIKE the way I do, but I can't stand having anything in the garage looking all dirty or half-ass. Plus it makes me feel pretty good when I unload my bikes, and I get people walking over to look at them, telling me I have nice bikes, and asking if they're new. To me....It's either done RIGHT, or whole-assed __________________ “Being tolerant does not mean that I share another one’s belief. But it does mean that I acknowledge another one’s right to believe, and obey, his own conscience.” Viktor Frankl

03-13-2011, 06:33 PM	#3
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	Sweet

03-13-2011, 06:54 PM	#4
TYEster With MORE TYEstosterone Join Date: Dec 2008 Location: TX Moto: '12 KX450F / 08 YZ250F #512 / 07 KX65 #1 Posts: 1,429	1. How does it hold up to plastics? 2. Environmentally friendly when washed off in the yard? I REALLY want some as CycleRanchMX.com is a regular place we ride, PACKED with red clay/sand mix which stains everything including head pipes to a nice burnt UT Longhorn orange.

03-14-2011, 09:39 AM	#7
jtemple Geek Join Date: Feb 2008 Location: Papillion, Nebraska Moto: 2011 Husqvarna TE630 Posts: 1,437	Is there any online source for this stuff?