Go Back   Two Wheel Fix > In the Garage or Shop > Mechanical or Tech

Reply
 
Thread Tools Display Modes
Old 03-29-2008, 10:37 AM   #1
jalaan1
orangina Zed
 
jalaan1's Avatar
 
Join Date: Feb 2008
Location: LI, NY
Moto: '12 Z1000
Posts: 700
Default changing oil/filter

hey guys,
this going to be my first time changing the oil and filter on my bike myself.
just a couple ?s

-should i go to a stealership and order an OEM filter and oil?
or do you guys recommend any particular online place.
-do you guys recommend any particular type/brand oil?
- i don't have stands for the bike, should that be a problem?
( i'm thinking not )


TIA
__________________
jalaan1 is offline   Reply With Quote
Old 03-29-2008, 01:51 PM   #2
Cutty72
Ride Naked.
 
Cutty72's Avatar
 
Join Date: Feb 2008
Location: Flat and Straight ND
Moto: 08 BUELL 1125R, 05 SV650S
Posts: 7,916
Default

Quote:
Originally Posted by jalaan1 View Post
hey guys,
this going to be my first time changing the oil and filter on my bike myself.
just a couple ?s

-should i go to a stealership and order an OEM filter and oil?
or do you guys recommend any particular online place.
-do you guys recommend any particular type/brand oil?
- i don't have stands for the bike, should that be a problem?
( i'm thinking not )


TIA

I have always used OEM filters on my bikes... Just a personal preferance, and I buy oil at the same time.
Stands are not necessary to change the oil, just make it easier. When you drain the oil, just be sure to stand it straight up for a bit to get all the oil out (depending on where your drain plug is)
__________________
Adrenaline... the wonder drug.

Quote:
Originally Posted by Gas Man View Post
Again... Cutty you are one smart man!!
Quote:
Originally Posted by The Chi View Post
If I have to get help to get it back up, I dont need to be riding it.

3662 Supply NCO

Cutty72 is offline   Reply With Quote
Old 03-29-2008, 02:28 PM   #3
Gas Man
Trip's Assistant
 
Gas Man's Avatar
 
Join Date: Feb 2008
Location: Imported from Detroit
Moto: 2009 HD Street Classic
Posts: 12,149
Default

You can also get fram bike filters at the auto stores. Murrays auto around here also sells some MC oil.
__________________
-Chris



"Why pay somebody else to fuck up your bike?"
Run Amsoil Product
Gas Man is offline   Reply With Quote
Old 03-29-2008, 03:13 PM   #4
marko138
DefenderOfTheBuelliverse
 
marko138's Avatar
 
Join Date: Feb 2008
Location: Parts Unknown
Moto: Buell XB12R
Posts: 18,585
Default

I use K&N filters. A little pricey...and I've used the fram's...and used OEM filters. They are all with in a few buck of each other. I use Repsol 10W40 synth blend. I buy it from www.sportbiketrackgear.com
__________________


Quote:
Grandma said she doesn't want you here when she gets back because you've been ruining everybody's lives and eating all our steak.
marko138 is offline   Reply With Quote
Old 03-29-2008, 07:22 PM   #5
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Read this: http://motorcycleinfo.calsci.com/Con...tml#OilFilters and make your own decision. I use the long Purolator Pure One filter on the CBR and GTX oil. But I have heard good things about Shell Rotella.
No Worries is offline   Reply With Quote
Old 03-29-2008, 07:27 PM   #6
dReWpY
RIP REX
 
dReWpY's Avatar
 
Join Date: Feb 2008
Location: Murfreesboro, TN
Moto: 2008 1125R
Posts: 7,467
Default

amsoil and kn filter
__________________

Venom R1-016 Squadron
Quote:
Originally Posted by Trip View Post
Moral of this story is everyone is fucked up no matter atheist or religious.
dReWpY is offline   Reply With Quote
Old 03-29-2008, 07:37 PM   #7
NONE_too_SOFT
Chopstix / \
 
NONE_too_SOFT's Avatar
 
Join Date: Feb 2008
Location: Akron OH
Moto: 03 CBR RR
Posts: 5,350
Default

just put a k&n on... as far as oil brands go, eh, just change em every few thousand miles and you're money.
NONE_too_SOFT is offline   Reply With Quote
Old 03-29-2008, 08:03 PM   #8
WARputer
WERA Yellow Plate
 
WARputer's Avatar
 
Join Date: Mar 2008
Location: Lake Murray, South Carolina
Moto: 2005 Hayabusa
Posts: 625
Default

K&N here too ....with any good synthetic .
__________________
Chris
WARputer is offline   Reply With Quote
Old 03-29-2008, 08:26 PM   #9
PhiSig1071
Let go of my ears.
 
PhiSig1071's Avatar
 
Join Date: Feb 2008
Location: Jacksonville, FL
Moto: '03 GSX-R600, '04 625SMC
Posts: 1,394
Default

Stands do make it easier, but as long as you remember to stand the bike up to drain out all the oil then you'll be fine.

Get a K&N! Sportbike oil filters go on tight, if you've changed the oil in your car then you know you usually spin it on til it makes contact then tighten it a quarter to half turn (and it can still be a bitch to get off). Sportbike filters usually go on until they make contact then two complete turns to tighten, so you might not be able to get it off without stabbing it with a screwdriver. The K&N has a nut (kinda) at the end of the filter which makes it easier to get it on or off, especially after it's been on there a while and it's tight.

I have used Castrol Act-Evo non-syn (20k plus miles with no problems), Castrol R-4 Superbike full synthetic (handful of trackdays with no problems) and Mobil 1 full syn with great success. I have also heard very good things about Rotella-T full synthetic, which is a car oil. You can use car oil in a bike, just make absolutely sure it does not have "friction modifiers" such as molybendium in it, they bind to clutch plates and cause slippage. Generally if it says "with energy saving additives" you can't use it. For the slight difference in price I recommend using motorcycle specific fully synthetic oil.

A couple general things, (this is what I do) run the bike and get the oil hot, then allow it to cool until it is only slightly warm, then drain the oil. This is because the oil passages in a motorcycle are very small, if you start the bike and get the oil a little warm then there will be oil in the passages when you try to drain it. If you get it hot, then let it sit, it'll still be warm and drain easily, and there will be enough time for it to drain out of the head. Also make sure you put something on the mid-pipes (newspaper works great) or oil will get on them when you take off the filter. Some oil will still get on the mid-pipes, so the bike will smoke a little when you start it. Also, put in the required amount of oil in the bike, run it for a minute or two, then check the oil level as recommended by the owners manual. This will give the oil time to circulate into the oil passages in the head. If I can think of anything else I'll post it up.

Good Luck!
PhiSig1071 is offline   Reply With Quote
Old 03-29-2008, 08:36 PM   #10
NONE_too_SOFT
Chopstix / \
 
NONE_too_SOFT's Avatar
 
Join Date: Feb 2008
Location: Akron OH
Moto: 03 CBR RR
Posts: 5,350
Default

pretty right on. some bikes actually recommend you put the bike on its kickstand to drain because of the location of the plug. basically just be patient and give her time to drain.

after its drained, check your oil for debris, it may indicated abnormal engine wear. metal shavings, or anything else that looks odd.

and check your OM, because some plugs require you replace the o-ring after each change to ensure a proper seal.
NONE_too_SOFT is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.