rear/front stand

Crazy · 05-05-2008, 12:29 PM

I'm thinking about buying a rear + front stand from a local rider. This is what he said about it:

Quote:

I also have a white Lockhart-Phillips rear stand that I should get rid of. It's in excellent shape and even has the front stand attachment so you can raise the front of the bike under the steering head bearing. Please note that the front stand attachment does not fit bikes with long "noses". It worked on all my GSX-R's until the 2005. The rear stand works with most anything. $60.

will this work on my SV650s? by "nose" does he mean upper fairing? is that a good price?

NONE_too_SOFT · 05-05-2008, 12:33 PM

Fairly sure he is just talking about the headlight assembly/fairings in the front. i'd have to see the tripple stand to see if its gonna be a problem for you. I dont have a tripple stand, my front sits on its forks. not really a big deal unless you're looking to take you're wheels off.

just ride over there and see if you can get it up .

price seems right.

Trip · 05-05-2008, 12:55 PM

no telling if it will or not

Cutty72 · 05-05-2008, 02:03 PM

price is right, go check 'em out.

PhiSig1071 · 05-05-2008, 03:36 PM

That is what is commonly referred to as a "pin-lift" front stand. There is a hole in the bottom of the steering head tube that the "pin" on the front stand will fit into, and then lift the bike off the ground. It is an excellent stand to have if you plan to do maintainence on the forks of your bike, because you can remove everything, including the top triple clamp, while the bike is resting on that stand. At $60 that's a steal. You might need to order a different "pin" because all bikes are different, although if it worked on a GSXR there's a chance it'll work on your SV as well.

Quick281 · 05-06-2008, 03:20 AM

Quote:

Originally Posted by PhiSig1071

At $60 that's a steal. You might need to order a different "pin" because all bikes are different, although if it worked on a GSXR there's a chance it'll work on your SV as well.

Thats what I would say.

05-05-2008, 03:36 PM	#5
PhiSig1071 Let go of my ears. Join Date: Feb 2008 Location: Jacksonville, FL Moto: '03 GSX-R600, '04 625SMC Posts: 1,394	That is what is commonly referred to as a "pin-lift" front stand. There is a hole in the bottom of the steering head tube that the "pin" on the front stand will fit into, and then lift the bike off the ground. It is an excellent stand to have if you plan to do maintainence on the forks of your bike, because you can remove everything, including the top triple clamp, while the bike is resting on that stand. At $60 that's a steal. You might need to order a different "pin" because all bikes are different, although if it worked on a GSXR there's a chance it'll work on your SV as well. __________________ Entia non sunt multiplicanda necessitatem

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-05-2008, 12:33 PM	#2
NONE_too_SOFT Chopstix / \ Join Date: Feb 2008 Location: Akron OH Moto: 03 CBR RR Posts: 5,350	Fairly sure he is just talking about the headlight assembly/fairings in the front. i'd have to see the tripple stand to see if its gonna be a problem for you. I dont have a tripple stand, my front sits on its forks. not really a big deal unless you're looking to take you're wheels off. just ride over there and see if you can get it up . price seems right.