$600 AR-15 bargain bin sale

Rangerscott · 03-26-2010, 05:18 PM

http://cmmginc.secure-mall.com/shop/?shop=1&cat=161&

Regular - $600

Chromed - $650

The good: Price

The bad: You don't get to call and pick what brand you want.

*edit*

Nevermind. There's a pull down tab for $25 gand pick.

Cutty72 · 03-26-2010, 07:00 PM

Not worth it. I want to know what i'm getting in a firearm.

smileyman · 03-26-2010, 07:39 PM

In .223 no way, .308 I'll take two!!!

goof2 · 03-26-2010, 07:58 PM

I'd rather get a custom kit and a striped lower from someplace like del-ton. I'd get exactly what I want, it would be new, and it would only be a couple hundred more. If you went with their basic kit and basic lower it actually works out to be cheaper.

Adeptus_Minor · 03-26-2010, 08:12 PM

Doesn't seem too bad, actually. Particularly if you were going to build out a couple of rifles.
You could always break it down and swap parts around.

nhgunnut · 03-27-2010, 04:34 PM

They say it up front . They aint pretty, If I were going from scratch I would take one of these the only place that is iffy will be head spacing and the bolt and they aren't going to let a bad one out of the shop. worst case you gun coat it and swap the lower for a Branded one.

Smittie61984 · 03-29-2010, 08:07 PM

I wouldn't mind getting one, but odds are I'd end up with a Bushmaster and I'll find out that everyone else got Colts.

03-26-2010, 05:18 PM	#1
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	$600 AR-15 bargain bin sale http://cmmginc.secure-mall.com/shop/?shop=1&cat=161& Regular - $600 Chromed - $650 The good: Price The bad: You don't get to call and pick what brand you want. edit Nevermind. There's a pull down tab for $25 gand pick. Last edited by Rangerscott; 03-28-2010 at 12:18 PM..

03-26-2010, 07:39 PM	#3
smileyman White Trash Hero Join Date: Mar 2008 Location: NW Arkansas Moto: Buell 1125R Porco Rosso Edition Posts: 4,895	In .223 no way, .308 I'll take two!!! __________________ Arkriders.com To be the best you must first be willing to risk the worst!

03-26-2010, 08:12 PM	#5
Adeptus_Minor Hopster Join Date: Nov 2008 Location: Austin, TX Moto: 2009 Buell 1125R Posts: 4,743	Doesn't seem too bad, actually. Particularly if you were going to build out a couple of rifles. You could always break it down and swap parts around. __________________ “Well, obviously before; after was all gendarmes and dick stitches.”

03-27-2010, 04:34 PM	#6
nhgunnut gun totin redneck Join Date: Apr 2008 Location: South West New Hampshire Moto: turbo busa 999 Duc Goldwing & Victory Posts: 1,130	They say it up front . They aint pretty, If I were going from scratch I would take one of these the only place that is iffy will be head spacing and the bolt and they aren't going to let a bad one out of the shop. worst case you gun coat it and swap the lower for a Branded one. __________________ Evolution requires a body count, Count or be Counted!

03-29-2010, 08:07 PM	#7
Smittie61984 I give Squids a bad name Join Date: Mar 2008 Location: Fly Over State Moto: 1996 CBR600 F3 (AKA the Flying Turd) Posts: 4,742	I wouldn't mind getting one, but odds are I'd end up with a Bushmaster and I'll find out that everyone else got Colts. __________________ lifts - R.I.P.

03-26-2010, 07:58 PM	#4
goof2 AMA Supersport Join Date: Feb 2009 Posts: 4,756	I'd rather get a custom kit and a striped lower from someplace like del-ton. I'd get exactly what I want, it would be new, and it would only be a couple hundred more. If you went with their basic kit and basic lower it actually works out to be cheaper.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode