Taking a vehicle out of a field

Smittie61984 · 08-08-2009, 04:42 PM

I took one of my old vehicles out from behind my house today. It's a 1998 V6 2wd that has been sitting behind my house for almost 2 years since I hit a deer with it.

Well I got a new battery for it today and plan to do the basics like change the oil, brake fluid, check pads/rotors, coolant, etc.

Anything else I need to look out for besides spiders and snakes? Maybe throw some fuel treatment in if that stuff even works. Or something to help the old gas since it has a 1/4 tank in it and I want to burn that out before I add new gas.

So far it seems to be running very smoothly and I'm very happy. I want to run most of the gas out and then fill it up. The AC/Heat doesn't work at all (doesn't even blow), but it'll be a good vehicle for getting back and forth to work and school.

Avatard · 08-08-2009, 05:31 PM

If it's rubber (hoses, belts, etc.) it probably needs replacement.

goof2 · 08-08-2009, 05:32 PM

Check belts and hoses. That stuff can dryrot in 2 years. Look over the electrical wiring as critters sometimes like to chew it. I would also take a look at the air filter. Make sure nothing has eaten through it or used the airbox for food storage. I'm not sure if I would but you might want to crank over the engine a bit before giving it spark to pump some oil around. There is not going to be any oil left in the motor, it will all be in the pan.

Smittie61984 · 08-08-2009, 05:38 PM

I did a quick glance over the belts and hoses and so far they seem to be fine. I'll probably replace the serpentine belt regardless. The tires are in perfect shape too, no dry rot.

Forgot to check the Air Filter but it's a K&N so that should add about 110hp and fight off birds who want to nest.

Smittie61984 · 08-08-2009, 05:51 PM

checked the hoses and all seems fine. Even the serpentine seems fine but I'm sure I'll replace it.

Only one hose seems questionable and it had some mud caked on it from god knows when. It goes from the heater core to the motor.

The air filter was in tip top shape and no need to replace. Just neeeds to be cleaned.

Now if I could figure out why the fan (for the AC/Heat) doesn't blow then I'd be one happy camper. But that was before I hit the deer.

101lifts2 · 08-08-2009, 06:28 PM

Remove the spark plugs and spray a little oil in the cylinder. I can guarantee that the cylinder walls are rusted as with the rings.

Avatard · 08-08-2009, 06:35 PM

RIF:

"So far it seems to be running very smoothly and I'm very happy."

If it's running, it's seen oil already.

08-08-2009, 04:42 PM	#1
Smittie61984 I give Squids a bad name Join Date: Mar 2008 Location: Fly Over State Moto: 1996 CBR600 F3 (AKA the Flying Turd) Posts: 4,742	Taking a vehicle out of a field I took one of my old vehicles out from behind my house today. It's a 1998 V6 2wd that has been sitting behind my house for almost 2 years since I hit a deer with it. Well I got a new battery for it today and plan to do the basics like change the oil, brake fluid, check pads/rotors, coolant, etc. Anything else I need to look out for besides spiders and snakes? Maybe throw some fuel treatment in if that stuff even works. Or something to help the old gas since it has a 1/4 tank in it and I want to burn that out before I add new gas. So far it seems to be running very smoothly and I'm very happy. I want to run most of the gas out and then fill it up. The AC/Heat doesn't work at all (doesn't even blow), but it'll be a good vehicle for getting back and forth to work and school. __________________ lifts - R.I.P.

08-08-2009, 05:31 PM	#2
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	If it's rubber (hoses, belts, etc.) it probably needs replacement. __________________ Insert free thought here.

08-08-2009, 05:38 PM	#4
Smittie61984 I give Squids a bad name Join Date: Mar 2008 Location: Fly Over State Moto: 1996 CBR600 F3 (AKA the Flying Turd) Posts: 4,742	I did a quick glance over the belts and hoses and so far they seem to be fine. I'll probably replace the serpentine belt regardless. The tires are in perfect shape too, no dry rot. Forgot to check the Air Filter but it's a K&N so that should add about 110hp and fight off birds who want to nest. __________________ lifts - R.I.P.

08-08-2009, 05:51 PM	#5
Smittie61984 I give Squids a bad name Join Date: Mar 2008 Location: Fly Over State Moto: 1996 CBR600 F3 (AKA the Flying Turd) Posts: 4,742	checked the hoses and all seems fine. Even the serpentine seems fine but I'm sure I'll replace it. Only one hose seems questionable and it had some mud caked on it from god knows when. It goes from the heater core to the motor. The air filter was in tip top shape and no need to replace. Just neeeds to be cleaned. Now if I could figure out why the fan (for the AC/Heat) doesn't blow then I'd be one happy camper. But that was before I hit the deer. __________________ lifts - R.I.P.

08-08-2009, 06:28 PM	#6
101lifts2 WSB Champion Join Date: Nov 2008 Location: Anaheim, CA Moto: 2009 Kawi ZX6R Posts: 5,570	Remove the spark plugs and spray a little oil in the cylinder. I can guarantee that the cylinder walls are rusted as with the rings. __________________ Train Hard Ron Paul - 2012 Mark of Excellence GM

08-08-2009, 05:32 PM	#3
goof2 AMA Supersport Join Date: Feb 2009 Posts: 4,756	Check belts and hoses. That stuff can dryrot in 2 years. Look over the electrical wiring as critters sometimes like to chew it. I would also take a look at the air filter. Make sure nothing has eaten through it or used the airbox for food storage. I'm not sure if I would but you might want to crank over the engine a bit before giving it spark to pump some oil around. There is not going to be any oil left in the motor, it will all be in the pan.

08-08-2009, 06:35 PM	#7
Avatard Crotch Rocket Curmudgeon Join Date: Nov 2008 Location: Here to integrity Moto: Li'l red baby Ninja Posts: 7,482	Hey guys... RIF: "So far it seems to be running very smoothly and I'm very happy." If it's running, it's seen oil already. __________________ Insert free thought here.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode