First time for everything... - Page 2

101lifts2 · 12-20-2010, 05:44 PM

I read the title and thought....First time for what? It isn't crashing. lol

Are you still limping or is ur knee OK? I was picturing the bike on top of your leg and you crying for help.

tallywacker · 12-20-2010, 05:48 PM

LoL

Misfit · 12-20-2010, 07:34 PM

You're ok, right?

Because omg that's the funniest sh!t I've heard in a while, and the Kat Williams link has me roflmao! Don't feel too bad though, we've all been there...just maybe not QUITE the same.

Particle Man · 12-20-2010, 07:37 PM

Crap. That really blows.

Triple · 12-21-2010, 07:11 PM

Quote:

Originally Posted by 101lifts2

Are you still limping or is ur knee OK? I was picturing the bike on top of your leg and you crying for help.

I put the fucker on my shoulder and carried it back to the garage. If I wasn't concerned with broken plastics, I would have thrown it.

It actually did fall on my bad knee, but it didn't do any damage. My leg was stiff the rest of the day, but I don't feel anything now.

Quote:

Originally Posted by Misfit

You're ok, right? Because omg that's the funniest sh!t I've heard in a while, and the Kat Williams link has me roflmao! Don't feel too bad though, we've all been there...just maybe not QUITE the same.

I actually watched that Kat Williams bit on Saturday night.

On Monday morning, I re-enacted it...

ericr · 12-21-2010, 09:39 PM

Shit, the story is lol funny dude!

Sucks about the bike and glad it didn't get you!

Triple · 01-24-2011, 12:16 AM

Parts finally arrived late last week. Only took a month...

Because the bike spent a few seconds running on its side, I decided to pull the tank and airbox to check for oil in the combustion chambers. I've heard horror stories of people starting their recently crashed bikes only to break and bend engine internals because of incompressible liquid atop their pistons. Pulled the plugs, cranked it a few times, and no oil shot out.

While I had it apart, I decided to install the K&N air filter I bought months ago, and looky what I found:

Same thing has happened with the other two bikes I've had at this property. I don't know how to keep the mice out of the airbox. I put traps under the bike. Just a hazard of living in the woods, I suppose.

Upon reassembly, the bike fired up easy enough, but it's producing more smoke than usual and the check-engine light is on. It idles fine and responds to throttle inputs per normal.

Even with the new tube, however, the throttle sticks just like it did the day I crashed. With the engine off, it's sticky, but it retracts on its own. With the engine running, it freezes open and must be retracted manually. New cables..?

101lifts2 · 01-24-2011, 01:39 AM

Dude just buy a new bike...even if it is a 250. lol

What is that shit in the airbox?

derf · 01-24-2011, 01:55 AM

Is the handlebar bent? It could cause the throttle to stick, and temp changes could cause it to tighten and loosen with the time of day and heat from the bike.

Particle Man · 01-24-2011, 08:16 AM

Quote:

Originally Posted by Triple

Parts finally arrived late last week. Only took a month...

Because the bike spent a few seconds running on its side, I decided to pull the tank and airbox to check for oil in the combustion chambers. I've heard horror stories of people starting their recently crashed bikes only to break and bend engine internals because of incompressible liquid atop their pistons. Pulled the plugs, cranked it a few times, and no oil shot out.

While I had it apart, I decided to install the K&N air filter I bought months ago, and looky what I found:

Same thing has happened with the other two bikes I've had at this property. I don't know how to keep the mice out of the airbox. I put traps under the bike. Just a hazard of living in the woods, I suppose.

Upon reassembly, the bike fired up easy enough, but it's producing more smoke than usual and the check-engine light is on. It idles fine and responds to throttle inputs per normal.

Even with the new tube, however, the throttle sticks just like it did the day I crashed. With the engine off, it's sticky, but it retracts on its own. With the engine running, it freezes open and must be retracted manually. New cables..?

I can't see the pic but when I lived in a fairly heavily wooded area and mice were a problem I placed mothballs around parked vehicles (punch some holes in some ziplock baggies to make them easy to move around and invest in bulk in nitrile gloves). Smells like ass but keeps the mice away.

12-20-2010, 05:44 PM	#11
101lifts2 WSB Champion Join Date: Nov 2008 Location: Anaheim, CA Moto: 2009 Kawi ZX6R Posts: 5,570	I read the title and thought....First time for what? It isn't crashing. lol Are you still limping or is ur knee OK? I was picturing the bike on top of your leg and you crying for help. __________________ Train Hard Ron Paul - 2012 Mark of Excellence GM

12-20-2010, 05:48 PM	#12
tallywacker Virtual Machine Join Date: Mar 2008 Location: PA Moto: 2010 Ducati Hypermotard Posts: 1,698	LoL __________________

01-24-2011, 01:39 AM	#18
101lifts2 WSB Champion Join Date: Nov 2008 Location: Anaheim, CA Moto: 2009 Kawi ZX6R Posts: 5,570	Dude just buy a new bike...even if it is a 250. lol What is that shit in the airbox? __________________ Train Hard Ron Paul - 2012 Mark of Excellence GM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-20-2010, 07:34 PM	#13
Misfit Trailer Queen Join Date: May 2010 Posts: 13	You're ok, right? Because omg that's the funniest sh!t I've heard in a while, and the Kat Williams link has me roflmao! Don't feel too bad though, we've all been there...just maybe not QUITE the same.

12-20-2010, 07:37 PM	#14
Particle Man Custom User Title Join Date: Nov 2008 Location: Central NY Moto: 2003 SV650S Posts: 14,959	Crap. That really blows.

01-24-2011, 12:16 AM	#17
Triple uncomfortably numb Join Date: Nov 2008 Location: JOH-JAH! Moto: WR250R & Bonneville Posts: 409	Parts finally arrived late last week. Only took a month... Because the bike spent a few seconds running on its side, I decided to pull the tank and airbox to check for oil in the combustion chambers. I've heard horror stories of people starting their recently crashed bikes only to break and bend engine internals because of incompressible liquid atop their pistons. Pulled the plugs, cranked it a few times, and no oil shot out. While I had it apart, I decided to install the K&N air filter I bought months ago, and looky what I found: Same thing has happened with the other two bikes I've had at this property. I don't know how to keep the mice out of the airbox. I put traps under the bike. Just a hazard of living in the woods, I suppose. Upon reassembly, the bike fired up easy enough, but it's producing more smoke than usual and the check-engine light is on. It idles fine and responds to throttle inputs per normal. Even with the new tube, however, the throttle sticks just like it did the day I crashed. With the engine off, it's sticky, but it retracts on its own. With the engine running, it freezes open and must be retracted manually. New cables..?

01-24-2011, 01:55 AM	#19
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	Is the handlebar bent? It could cause the throttle to stick, and temp changes could cause it to tighten and loosen with the time of day and heat from the bike.