My build thread - KZ440

ontwo · 07-17-2010, 11:57 PM

Ok. A bit of an update. Still waiting on the oil seal. Here is why

Got the pin back in the crankshaft that seats in the backof the timing mechanism. It was sheared off. This is how it looked when I took the timing mech off

It took me the longest to drill out the old pin to make room for the new one.

I started on my seat. Not sure if I'm gonna stick with this one or start over.

Metal for the seat.

Camping foam

Here are tools I used to shape the seat

Waiting on the adhesive to set

Also worked on the cracked intake boots

More to come...as soon as the oil seal gets here.

07-17-2010, 11:57 PM	#10
ontwo Designated Drinker Join Date: Jul 2008 Location: shitville Moto: 2009 ZX6R Posts: 1,661	Ok. A bit of an update. Still waiting on the oil seal. Here is why Got the pin back in the crankshaft that seats in the backof the timing mechanism. It was sheared off. This is how it looked when I took the timing mech off It took me the longest to drill out the old pin to make room for the new one. I started on my seat. Not sure if I'm gonna stick with this one or start over. Metal for the seat. Camping foam Here are tools I used to shape the seat Waiting on the adhesive to set Also worked on the cracked intake boots More to come...as soon as the oil seal gets here. __________________