Go Back   Two Wheel Fix > General > Off Topic

Reply
 
Thread Tools Display Modes
Old 02-07-2009, 04:27 PM   #1
Quick281
Victim of Blazer Rapage
 
Quick281's Avatar
 
Join Date: Mar 2008
Location: Talkeetna, AK
Moto: 06 GSXR 600
Posts: 1,707
Default How do you carry your bike?

So my plans to get to Alaska seem to have changed a bit and suddenly I may be looking into a truck/suv and just carry most of my belonging with me instead of riding around and having them sent to me.

Sorta sucks because I wanted to do the big trip but since I have to be in Alaska at the end of April, I would have had to spend some money on cold weather gear and still take various amount of risks with the cold/icy roads.

None the less I am looking into truck and just throwing my bike in the back for the trip. Think my bike is just under 7 feet.

Wondering how all of you do it? I have seen some interesting setups so I know there is a wealth of experience to be shared here.
__________________
-Alex-
Resident TWFix Noob.


My 06 GSXR 600 <-- Its Clickable Fools.
Quick281 is offline   Reply With Quote
Old 02-07-2009, 04:31 PM   #2
rogue
Wanting to Go Back!!!!
 
rogue's Avatar
 
Join Date: Nov 2008
Location: North Louisiana
Moto: A Twin
Posts: 4,067
Default

I've used canyon dancers, ratchet straps, and a wheel chock.....
__________________
The key to living a full life is to live dangerously, yet not dying stupidly.


My knee pads may be Air-Ride and chrome plated but I have standards as to who I use them on.
Quote:
Originally Posted by Dragonpaco
so you're just a cougar who doesnt hunt.....a domesticated cougar
Myspace
rogue is offline   Reply With Quote
Old 02-07-2009, 04:40 PM   #3
derf
token jewboy
 
derf's Avatar
 
Join Date: Nov 2008
Moto: CBR 900, KLR ugly ass duckling, Gas Man
Posts: 10,799
Default

I have a wheel schock on a 2x8 that goes from one end of my truck to the other, then I just tie the bike down good with ratchet straps. My cbr fits in my 5 foot bed with the tailgate down, but I learned that you need a piece of wood under the rear wheel or it will collapse the tailgate, and the tailgate will start to fold.
__________________
derf is offline   Reply With Quote
Old 02-07-2009, 05:08 PM   #4
Quick281
Victim of Blazer Rapage
 
Quick281's Avatar
 
Join Date: Mar 2008
Location: Talkeetna, AK
Moto: 06 GSXR 600
Posts: 1,707
Default

Quote:
Originally Posted by derf View Post
I have a wheel schock on a 2x8 that goes from one end of my truck to the other, then I just tie the bike down good with ratchet straps. My cbr fits in my 5 foot bed with the tailgate down, but I learned that you need a piece of wood under the rear wheel or it will collapse the tailgate, and the tailgate will start to fold.
Thanks for the input. Ideally I will get a truck and some of the ones I am looking at are either equipped with a short or long bed. I think the short beds are 6 feet long and in that case it will be tailgate down. But I suppose I could fit the bike in sideway.

How do you get the bike in and out of the truck? That seems to be the challenging part to me.
__________________
-Alex-
Resident TWFix Noob.


My 06 GSXR 600 <-- Its Clickable Fools.
Quick281 is offline   Reply With Quote
Old 02-07-2009, 05:09 PM   #5
buzzcutt2
Fuzznutz
 
buzzcutt2's Avatar
 
Join Date: Nov 2008
Location: Palm Beach Gardens, FL
Moto: 98 ZX9
Posts: 999
Default

Backup to a hill or slope or ditch. Drive it right in/out.
buzzcutt2 is offline   Reply With Quote
Old 02-07-2009, 05:11 PM   #6
Quick281
Victim of Blazer Rapage
 
Quick281's Avatar
 
Join Date: Mar 2008
Location: Talkeetna, AK
Moto: 06 GSXR 600
Posts: 1,707
Default

Quote:
Originally Posted by buzzcutt2 View Post
Backup to a hill or slope or ditch. Drive it right in/out.
Figured that as a backup if ramps are ridiculously expensive.
__________________
-Alex-
Resident TWFix Noob.


My 06 GSXR 600 <-- Its Clickable Fools.
Quick281 is offline   Reply With Quote
Old 02-07-2009, 05:11 PM   #7
rogue
Wanting to Go Back!!!!
 
rogue's Avatar
 
Join Date: Nov 2008
Location: North Louisiana
Moto: A Twin
Posts: 4,067
Default

Quote:
Originally Posted by Quick281 View Post
Thanks for the input. Ideally I will get a truck and some of the ones I am looking at are either equipped with a short or long bed. I think the short beds are 6 feet long and in that case it will be tailgate down. But I suppose I could fit the bike in sideway.

How do you get the bike in and out of the truck? That seems to be the challenging part to me.
I've used a 4 wheeler ramp or even backed the truck into a ditch and rode/pushed the bike in. When you do that, it should allow the tailgate to be pretty even with the ground when you let it down. Ok, I didn't....the ex did. No way would I do either.
__________________
The key to living a full life is to live dangerously, yet not dying stupidly.


My knee pads may be Air-Ride and chrome plated but I have standards as to who I use them on.
Quote:
Originally Posted by Dragonpaco
so you're just a cougar who doesnt hunt.....a domesticated cougar
Myspace
rogue is offline   Reply With Quote
Old 02-07-2009, 05:16 PM   #8
derf
token jewboy
 
derf's Avatar
 
Join Date: Nov 2008
Moto: CBR 900, KLR ugly ass duckling, Gas Man
Posts: 10,799
Default

What he said. I have a small set of ramps, like 3 feet each, I bougth the end at autozone that sits on the tailgate and then I used some 2x8's with a 2x4 screwed into the bottom for strength, I just back up to a hill and ride it right up or down.

It literally takes 5 minutes to load or unload my bikes by myself.

I think the ramps cost me a total of like $35

Also check your PM box
__________________
derf is offline   Reply With Quote
Old 02-07-2009, 05:22 PM   #9
Dnyce
flyin high
 
Dnyce's Avatar
 
Join Date: Mar 2008
Location: cali
Moto: 10speed huffy w/cards in the spokes
Posts: 2,318
Default

collapse the tailgate? huh?
__________________
"Racing Is Life, Everything Before and After is Just Waiting" Steve McQueen
Dnyce is offline   Reply With Quote
Old 02-07-2009, 05:52 PM   #10
t-homo
WSB Champion
 
Join Date: Feb 2008
Location: Springfield, MO
Posts: 7,146
Default

I agree with the ditch idea. I typically just use ratchet straps to keep it where its at.

Last edited by t-homo; 02-08-2009 at 01:58 AM..
t-homo is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.