new Sena couple of questions

tommymac · 06-18-2012, 07:22 PM

So I am finally gettin gmy new sena up and going adn already have a few question sin regards to mounting the unit and headphones.I have a shoei RF1000 for reference.

It looks like I will have to use the adhesive since the bracketwont slip righ tunder the padding due to a strip of leather being there. Did any of yo uhave to go this route. I just wanted to know how secure this adhesive stuff is.

Also any tricks for positioning the headphones. There is a cutout for the ears and will have to use the felt adhesive in there to keep it in place.

I am sure there will be a ton more questions being I am so tech savvy LOL

Trip · 06-18-2012, 08:44 PM

Had to do my schuberth the same way. Holds fine.

Adjusting ear piece is just trial and error. Try and move your helmet around while wearing it and see if it gets louder. If it gets louder, move the earphones in the opposite direction of which way you had to move the helmet. Keep doing that til the loudest point is dead center of where you wear your helmet

Captain Morgan · 06-18-2012, 08:52 PM

Also, from experience of wearing Trips Sena on the BRP, once you get your earpieces situated where you want them, use a marker and draw the outline of the speaker, then cut a little bit of the helmet foam out where you want the speaker so you can have the speaker recessed. Otherwise, if you have ears that stick out like mine, the speakers will rub your ears and make them sore after some miles.

tommymac · 06-18-2012, 11:27 PM

trip, turns out I can pull tha tpiece out so I dont need to use the adhesive. So thats one less problem. I got a prety good idea on where I want the ear pieces. its not perfect because a snap to the helmet foam is in the way but I think it will be ok. On my shoei there isnt any foam over the ears so the phones will sit prety far back. I suffered a simialr problem with my old chatter box. The earpieces would irritate my ears after an hour or so of constant riding.

derf · 06-19-2012, 02:34 AM

The sena earpieces hit my ears unless I use an exacto knife and cut out room for them to sit in

Trip · 06-19-2012, 08:30 AM

new touring helmets come with speaker pockets. Schuberth does and it's awesome.

Gas Man · 06-19-2012, 09:02 AM

I just found out that my iPhone will bluetooth with my Zumo for the phone aspect and my Sena for mp3/pandora music! YEA!!!

tommymac · 06-19-2012, 09:05 AM

Quote:

Originally Posted by Gas Man

I just found out that my iPhone will bluetooth with my Zumo for the phone aspect and my Sena for mp3/pandora music! YEA!!!

Thats the main thing I want to try with it for my commuting, I was figuring it will be great for the gps aspect too but most of th etim eI am just trollin gto and from work, so soem streaming music or if I can get radio stations through my phone that would rock too.

Trip · 06-19-2012, 09:13 AM

Quote:

Originally Posted by Gas Man

I just found out that my iPhone will bluetooth with my Zumo for the phone aspect and my Sena for mp3/pandora music! YEA!!!

That was part of the new firmware update, seperating out the media device from the phone device.

I wish they would update to let you program in your own priority. I hate the GPS being first. Wish communicator was first.

Gas Man · 06-19-2012, 10:20 AM

Quote:

Originally Posted by Trip

That was part of the new firmware update, seperating out the media device from the phone device.

I wish they would update to let you program in your own priority. I hate the GPS being first. Wish communicator was first.

Well the Sena can do that and always could. What I was surprised was the iPhone being able to bluetooth to more than one item.

I have heard good things about the new OiS 6.0, can't wait for that.

06-18-2012, 07:22 PM	#1
tommymac Moto GP Star Join Date: Nov 2008 Posts: 11,022	new Sena couple of questions So I am finally gettin gmy new sena up and going adn already have a few question sin regards to mounting the unit and headphones.I have a shoei RF1000 for reference. It looks like I will have to use the adhesive since the bracketwont slip righ tunder the padding due to a strip of leather being there. Did any of yo uhave to go this route. I just wanted to know how secure this adhesive stuff is. Also any tricks for positioning the headphones. There is a cutout for the ears and will have to use the felt adhesive in there to keep it in place. I am sure there will be a ton more questions being I am so tech savvy LOL

06-19-2012, 02:34 AM	#5
derf token jewboy Join Date: Nov 2008 Moto: CBR 900, KLR ugly ass duckling, Gas Man Posts: 10,799	The sena earpieces hit my ears unless I use an exacto knife and cut out room for them to sit in __________________

06-19-2012, 09:02 AM	#7
Gas Man Trip's Assistant Join Date: Feb 2008 Location: Imported from Detroit Moto: 2009 HD Street Classic Posts: 12,149	I just found out that my iPhone will bluetooth with my Zumo for the phone aspect and my Sena for mp3/pandora music! YEA!!! __________________ -Chris "Why pay somebody else to fuck up your bike?" Run Amsoil Product

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-18-2012, 08:44 PM	#2
Trip Hold mah beer! Join Date: Feb 2008 Location: 80 Miles South of Moto Heaven Moto: 08 R1200GS Posts: 23,268	Had to do my schuberth the same way. Holds fine. Adjusting ear piece is just trial and error. Try and move your helmet around while wearing it and see if it gets louder. If it gets louder, move the earphones in the opposite direction of which way you had to move the helmet. Keep doing that til the loudest point is dead center of where you wear your helmet

06-18-2012, 08:52 PM	#3
Captain Morgan Let's do another U-turn Join Date: Feb 2008 Location: Indiana Moto: 2009 V-Strom Posts: 3,816	Also, from experience of wearing Trips Sena on the BRP, once you get your earpieces situated where you want them, use a marker and draw the outline of the speaker, then cut a little bit of the helmet foam out where you want the speaker so you can have the speaker recessed. Otherwise, if you have ears that stick out like mine, the speakers will rub your ears and make them sore after some miles.

06-18-2012, 11:27 PM	#4
tommymac Moto GP Star Join Date: Nov 2008 Posts: 11,022	trip, turns out I can pull tha tpiece out so I dont need to use the adhesive. So thats one less problem. I got a prety good idea on where I want the ear pieces. its not perfect because a snap to the helmet foam is in the way but I think it will be ok. On my shoei there isnt any foam over the ears so the phones will sit prety far back. I suffered a simialr problem with my old chatter box. The earpieces would irritate my ears after an hour or so of constant riding.

06-19-2012, 08:30 AM	#6
Trip Hold mah beer! Join Date: Feb 2008 Location: 80 Miles South of Moto Heaven Moto: 08 R1200GS Posts: 23,268	new touring helmets come with speaker pockets. Schuberth does and it's awesome.