Vibration and pull.

Triple · 02-02-2010, 03:22 PM

...

Rider · 02-02-2010, 03:25 PM

Bad shock/strut?

Dave · 02-02-2010, 03:26 PM

cracked subframe? My shelby z had that once

BobTheBiker · 02-02-2010, 03:28 PM

bent wheel or you have a U joint failing I'd suspect. its likely your issue is caused by several individual ones.

possibly a failing wheel bearing even.

anthonyk · 02-02-2010, 03:44 PM

Did thirdgenlxi do the work by some chance?

t-homo · 02-02-2010, 03:47 PM

pauldun170 · 02-02-2010, 03:51 PM

Not the thread I was expecting

Quote:

Originally Posted by Triple

Truck vibrates at freeway speeds and pulls to the left. Has relatively new tires with proper pressure; recently had its wheels rebalanced and the front end aligned.

My first thought was a stuck caliper, but there is no additional reaction upon application of the brakes.

Ideas?

bad bearing\hub

the chi · 02-02-2010, 04:43 PM

Quote:

Originally Posted by pauldun170

Not the thread I was expecting

My thoughts exactly! Could it be bad alignment? Did you hit anything?

goof2 · 02-02-2010, 04:47 PM

Quote:

Originally Posted by pauldun170

bad bearing\hub

It may be this but I would have thought the shop that did the balance/alignment would have caught it. They may have fucked up the balance or alignment as well. I would bring it back, especially if it wasn't doing this before you brought it there.

azoomm · 02-02-2010, 04:51 PM

Quote:

Originally Posted by Triple

Truck vibrates at freeway speeds and pulls to the left. Has relatively new tires with proper pressure; recently had its wheels rebalanced and the front end aligned.

My first thought was a stuck caliper, but there is no additional reaction upon application of the brakes.

Ideas?

I think it pulling to the left might have a problem with your arms being worked out from the bike....

http://www.twowheelfix.com/showthread.php?t=12842

Quote:

Originally Posted by Triple

... feel like it's riding on flat tires?

My bike has developed a new handling peculiarity over the past two months or so. The sensation is similar to riding on tires with low air pressure. Obviously, my tires are not low, and I've experimented with a few different pressures to see if it made any difference (it didn't).

Aggressive riding is out of the question. It's very unnerving and has me waiting for the front, rear, or both to step out on me at any time.

Also, the bike falls into left turns and resists right turns.

Ideas?

02-02-2010, 03:22 PM	#1
Triple uncomfortably numb Join Date: Nov 2008 Location: JOH-JAH! Moto: WR250R & Bonneville Posts: 409	Vibration and pull. ... Last edited by Triple; 04-07-2010 at 11:02 AM..

02-02-2010, 03:47 PM	#6
t-homo WSB Champion Join Date: Feb 2008 Location: Springfield, MO Posts: 7,146	Last edited by marko138; 02-02-2010 at 04:40 PM.. Reason: Douche.

02-02-2010, 03:25 PM	#2
Rider Moto GP Star Join Date: Feb 2008 Posts: 12,156	Bad shock/strut?

02-02-2010, 03:26 PM	#3
Dave Chaotic Neutral Join Date: Feb 2008 Location: Cherry Hill NJ Moto: GV1200 Madura, Hawk gt Posts: 13,992	cracked subframe? My shelby z had that once

02-02-2010, 03:28 PM	#4
BobTheBiker too much time on my hands Join Date: Jul 2008 Location: the northern district of god damn Moto: 01 ZX6R, looking for more now. Posts: 1,802	bent wheel or you have a U joint failing I'd suspect. its likely your issue is caused by several individual ones. possibly a failing wheel bearing even.

02-02-2010, 03:44 PM	#5
anthonyk WERA White Plate Join Date: Nov 2008 Location: Austin, TX Moto: '01 Aprilia Falco Posts: 1,041	Did thirdgenlxi do the work by some chance?