Go Back   Two Wheel Fix > General > Off Topic

Reply
 
Thread Tools Display Modes
Old 12-06-2009, 02:15 AM   #11
SteveP
Canyon Carver
 
SteveP's Avatar
 
Join Date: Nov 2008
Location: Pensacola, FL
Moto: The v-twin trifecta
Posts: 437
Default

Quote:
Originally Posted by Ineffable View Post
I tried to jump it today but no go... The techs at the Walmart I am at are fucking useless so won't get any help there. I can hear the fuel pump starting up when I turn the key so I don't think that is it. Tomorrow I am going to go and pull the spark plugs. I am inclined to think it is a blown headgasket as the last week or so it has been losing coolant really bad. It only overheated once on me, the rest of the time I have been keeping it topped off. I figured it was a cracked hose even though I couldn't locate it after hours of looking and planned on replacing it this weekend (guess not).
Pull the dipstick. Is the oil a creamy light brown? If so It's definetely a head gasket. The best way to test this would be a compression test.
SteveP is offline   Reply With Quote
Old 12-06-2009, 03:47 AM   #12
101lifts2
WSB Champion
 
101lifts2's Avatar
 
Join Date: Nov 2008
Location: Anaheim, CA
Moto: 2009 Kawi ZX6R
Posts: 5,570
Default

Quote:
Originally Posted by SteveP View Post
Pull the dipstick. Is the oil a creamy light brown? If so It's definetely a head gasket. The best way to test this would be a compression test.
Easier way is to remove the radiator cap and crank over the engine. If coolant shoots out, then combustion gases are being pushed into the cooling system (as long as air was bled out correctly in the first place).

But pulling the dipstick is easy or looking under the oil cap. You can also pull the plugs to check if they are all coolant soaked.
__________________
Train Hard

Ron Paul - 2012

Mark of Excellence
GM
101lifts2 is offline   Reply With Quote
Old 12-06-2009, 01:47 PM   #13
BobTheBiker
too much time on my hands
 
BobTheBiker's Avatar
 
Join Date: Jul 2008
Location: the northern district of god damn
Moto: 01 ZX6R, looking for more now.
Posts: 1,802
Default

Yep. if your cooling system gets pressurized in seconds flat from cold, its absolutely a headgasket, my S10 did this. if its indeed a 2.2, dont be afraid to ask me for help, I know ALL ABOUT this motor, inside and out.
BobTheBiker is offline   Reply With Quote
Old 12-06-2009, 05:48 PM   #14
No Worries
Keyboard Racer
 
No Worries's Avatar
 
Join Date: Feb 2008
Location: Mile High City
Moto: Old Superbikes
Posts: 1,016
Default

Quote:
Originally Posted by SteveP View Post
Pull the dipstick. Is the oil a creamy light brown? If so It's definetely a head gasket. The best way to test this would be a compression test.
White smoke from the exhaust was the old school method of seeing if antifreeze was getting into the combustion chamber. To see if there was a leak from the cooling system to the oil system, you would pull the dipstick and let a drop of oil fall on the hot exhaust manifold. Usually, nothing happens to the drop. But if there is water or antifreeze in the oil, it will bubble on the hot pipe.
No Worries is offline   Reply With Quote
Old 12-06-2009, 07:18 PM   #15
SteveP
Canyon Carver
 
SteveP's Avatar
 
Join Date: Nov 2008
Location: Pensacola, FL
Moto: The v-twin trifecta
Posts: 437
Default

Quote:
Originally Posted by No Worries View Post
White smoke from the exhaust was the old school method of seeing if antifreeze was getting into the combustion chamber. To see if there was a leak from the cooling system to the oil system, you would pull the dipstick and let a drop of oil fall on the hot exhaust manifold. Usually, nothing happens to the drop. But if there is water or antifreeze in the oil, it will bubble on the hot pipe.
I've never done the oil drop test. Interesting.
SteveP is offline   Reply With Quote
Old 12-06-2009, 10:53 PM   #16
Smittie61984
I give Squids a bad name
 
Smittie61984's Avatar
 
Join Date: Mar 2008
Location: Fly Over State
Moto: 1996 CBR600 F3 (AKA the Flying Turd)
Posts: 4,742
Default

Quote:
Originally Posted by No Worries View Post
White smoke from the exhaust was the old school method of seeing if antifreeze was getting into the combustion chamber.
I just drink the anti-freeze to see if I can taste the gas.

I'd check the oil for sure to make sure there isn't coolent in it.
__________________
lifts - R.I.P.
Smittie61984 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.