Bike hoist? - Page 2

racedoll · 01-31-2011, 08:06 PM

I have a front and rear stand. Beyond this, not sure what I'd do.

Amber Lamps · 01-31-2011, 08:12 PM

Ratchet straps are fine as long as they are heavy duty enough... I mean some of them have pull strengths several time the weight of a motorcycle. I last hung mine from my stairs at my apt to change my triple clamp, bearings and install the Cycle Cat top triple.

I mean our bikes weigh in at 4-500 lbs, big deal.

derf · 01-31-2011, 08:16 PM

Quote:

Originally Posted by Rangerscott

Nah Dawg. Just the front end. Since my rads on are the sides there is a bracket welded to my frame on each side as holding points for my rads. I just put a hook there, then the other hook goes through the hook on the cherry picker then to the bracket on the other side.

Of course I have a center stand to stabilize the rear. I'd put your rear on a choke. If you suspend it like the gsxr, then it's just going to move around on you when trying to take parts on/off and loosen/tighten bolts. Plus his front tire is too close to the picker.

I usually tie the wheel to the frame of the cherry picker so the bike doesnt move, its not perfect, but it works well enough. I can also spin the bike around and tie the back wheel to the hoist too. I've never had the luck to lift a bike that was easy to lift, generally i put the straps under both triple trees so that the weight is actually supported by the neck, in the rear the subframe holds it up.

I only ever do this if I need to work on the suspension or wheels, everything else can be done on the ground. The GSXR in my picture was lowered 3 inches and I was putting it back to stock height

derf · 01-31-2011, 08:18 PM

Quote:

Originally Posted by Amber Lamps

Ratchet straps are fine as long as they are heavy duty enough... I mean some of them have pull strengths several time the weight of a motorcycle. I last hung mine from my stairs at my apt to change my triple clamp, bearings and install the Cycle Cat top triple.

I mean our bikes weigh in at 4-500 lbs, big deal.

Thats what I was thinking, the ones I have are rated for 1000 lbs each, so they should be able to hold 500 lbs spread between 2 of them. I also wont use the pull through ones that I can never get tight, they suck

Rangerscott · 01-31-2011, 08:55 PM

That's the pull strength of the whole strap. I always worry about the stitching around the hooks and ratchet.

Triple · 02-01-2011, 12:00 AM

I used a 1,600-pound test ratchet strap as a lanyard while working on my roof this spring. The latch failed and I slid off the house, tearing the ACL, MCL, and patellar tendon in my left knee when I hit the ground. I'd been using it for days without incident when it gave out.

I'll use a ratchet strap to tie something down, but that was the last time I use one to suspend anything of value.

wildchild · 02-01-2011, 01:39 PM

engine hoist with chains here.

Rangerscott · 02-01-2011, 03:09 PM

Chains go scratchy scratchy.

If youre really worried about weight, they do makes straps that are used to raise BIG sea boatsout of the water.

Cutty72 · 02-02-2011, 01:06 AM

Quote:

Originally Posted by Triple

I used a 1,600-pound test ratchet strap as a lanyard while working on my roof this spring. The latch failed and I slid off the house, tearing the ACL, MCL, and patellar tendon in my left knee when I hit the ground. I'd been using it for days without incident when it gave out.

I'll use a ratchet strap to tie something down, but that was the last time I use one to suspend anything of value.

What gave on it? Did the strap break or did the ratchet let go?

Generally, the force to tie something down isn't much different than that of holding something up...

derf · 02-02-2011, 01:19 AM

Quote:

Originally Posted by Rangerscott

Chains go scratchy scratchy.

Was thinking the same thing

Quote:

Originally Posted by Cutty72

What gave on it? Did the strap break or did the ratchet let go?

Generally, the force to tie something down isn't much different than that of holding something up...

Yep but a lack of force could cause the strap to slip. From what he said the latch broke, but did the wheel spin freely, or did the return springs fail? Or was there a lack of tension on the strap and it slid free? Those ratchet straps rely on multiple tension wraps around the cylinder of the strap against itself for strength. The tighter the strap is tied down, the more tension teh strap places on itself

01-31-2011, 08:06 PM	#11
racedoll AMA Supersport Join Date: Nov 2008 Moto: '04 Kawasaki ZX6RR Posts: 3,392	I have a front and rear stand. Beyond this, not sure what I'd do.

01-31-2011, 08:12 PM	#12
Amber Lamps Moto GP Star Join Date: Mar 2008 Posts: 14,556	Ratchet straps are fine as long as they are heavy duty enough... I mean some of them have pull strengths several time the weight of a motorcycle. I last hung mine from my stairs at my apt to change my triple clamp, bearings and install the Cycle Cat top triple. I mean our bikes weigh in at 4-500 lbs, big deal.

01-31-2011, 08:55 PM	#15
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	That's the pull strength of the whole strap. I always worry about the stitching around the hooks and ratchet.

02-01-2011, 12:00 AM	#16
Triple uncomfortably numb Join Date: Nov 2008 Location: JOH-JAH! Moto: WR250R & Bonneville Posts: 409	I used a 1,600-pound test ratchet strap as a lanyard while working on my roof this spring. The latch failed and I slid off the house, tearing the ACL, MCL, and patellar tendon in my left knee when I hit the ground. I'd been using it for days without incident when it gave out. I'll use a ratchet strap to tie something down, but that was the last time I use one to suspend anything of value.

02-01-2011, 01:39 PM	#17
wildchild cruiser Join Date: Nov 2008 Location: on the run Moto: '09 HD superglide, 16 Yamaha FZ 09 Posts: 2,749	engine hoist with chains here.

02-01-2011, 03:09 PM	#18
Rangerscott Viff6N Mutated Warrior Join Date: Mar 2009 Location: Texas Moto: '01 Honda VFR 800 & '09 ER-6N Posts: 8,704	Chains go scratchy scratchy. If youre really worried about weight, they do makes straps that are used to raise BIG sea boatsout of the water.