Catch and release Harley?

Tmall · 09-09-2010, 12:50 PM

Some guy decided to do a burnout at the end of the pier at the Wharf Rat Rally in Digby, NS. Here's the result...

KSGregman · 09-09-2010, 12:56 PM

Clutch is on the left, son!

Maybe this should be in the "that will buff right out thread"?

Sea water in the cylinders...not good....soooooo not good.

Homeslice · 09-09-2010, 01:12 PM

Funny, but.....

Lifting it out of the water by the front wheel doesn't seem too bright............Probably bent the forks and steering stem. Why not lift it the frame instead?

Clay · 09-09-2010, 01:16 PM

Ummm, at that point I think it's a total write off and it doesn't really matter any more.

Tmall · 09-09-2010, 01:28 PM

Quote:

Originally Posted by Clay

Ummm, at that point I think it's a total write off and it doesn't really matter any more.

Honestly, it should be fine. We filled one of the sumps of our diesel engines at work with sea water, we filled and flushed it with oil 6 or 7 times and it's been running fine ever since.

However, his electrical is probably screwed which would cost a fair amount to replace.

Either way it's funny when people do dumb things!!

Dave · 09-09-2010, 01:30 PM

Quote:

Originally Posted by Tmall

Honestly, it should be fine. We filled one of the sumps of our diesel engines at work with sea water, we filled and flushed it with oil 6 or 7 times and it's been running fine ever since.

However, his electrical is probably screwed which would cost a fair amount to replace.

Either way it's funny when people do dumb things!!

Depends entirely on the rpm when the intake started sucking water. He might get lucky, or his rods could be horseshoes

Tmall · 09-09-2010, 01:31 PM

Quote:

Originally Posted by Dave

Depends entirely on the rpm when the intake started sucking water. He might get lucky, or his rods could be horseshoes

Completely slipped my mind that the engine was turning.. You're probably correct about it being pooched.

Apoc · 09-09-2010, 05:03 PM

LOL. Thats kinda funny. Poor Rocker.

The good news? I'd only worry about the electrical... Used 1584's are fairly cheap (seen em with low miles as low as 1.5-2k$, as many owners with lotsa money like to pull and replace them.

Or he could rebuild the whole thing with a 110ci for about 4.5-5k. Its bad, but if he doesnt want to write it off, it can be fixed.

Were you there when it happened? Or just a shot off a local site?

Tmall · 09-09-2010, 05:42 PM

Shot off of a local site. You know I'm too anti-social to go to any kind of rally.

Apoc · 09-09-2010, 11:55 PM

Quote:

Originally Posted by Tmall

Shot off of a local site. You know I'm too anti-social to go to any kind of rally.

Fair enough, I dont blame you.

09-09-2010, 12:50 PM	#1
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	Catch and release Harley? Some guy decided to do a burnout at the end of the pier at the Wharf Rat Rally in Digby, NS. Here's the result...

09-09-2010, 05:03 PM	#8
Apoc For Science. You Monster. Join Date: Nov 2008 Location: Canada Moto: '08 HD FLSTSB Posts: 3,546	LOL. Thats kinda funny. Poor Rocker. The good news? I'd only worry about the electrical... Used 1584's are fairly cheap (seen em with low miles as low as 1.5-2k$, as many owners with lotsa money like to pull and replace them. Or he could rebuild the whole thing with a 110ci for about 4.5-5k. Its bad, but if he doesnt want to write it off, it can be fixed. Were you there when it happened? Or just a shot off a local site? __________________ Android OS causes gay. Dont let your child use Android (unless she's a hot female). And dont let your babies grow up to be cowboys, either. Last edited by Apoc; 09-09-2010 at 05:06 PM..

09-09-2010, 12:56 PM	#2
KSGregman Get Fit...or Get OUT Join Date: Nov 2008 Location: KS Moto: 07 M109-R Posts: 1,993	Clutch is on the left, son! Maybe this should be in the "that will buff right out thread"? Sea water in the cylinders...not good....soooooo not good.

09-09-2010, 01:12 PM	#3
Homeslice Elitist Join Date: Nov 2008 Location: SF Bay Area Moto: Gix 750 Posts: 11,351	Funny, but..... Lifting it out of the water by the front wheel doesn't seem too bright............Probably bent the forks and steering stem. Why not lift it the frame instead?

09-09-2010, 01:16 PM	#4
Clay I know nothing... Join Date: Aug 2009 Location: Raleigh, NC Posts: 134	Ummm, at that point I think it's a total write off and it doesn't really matter any more.

09-09-2010, 05:42 PM	#9
Tmall Aspiring Rapper Join Date: Nov 2008 Location: Halifax, NS Moto: '12 CB1000R Posts: 3,569	Shot off of a local site. You know I'm too anti-social to go to any kind of rally.